Before operating your unit:
B.2 Using the scent release function
(optional)
Your air purifi er can also disperse a
pleasant scent. To do so, a scent release
capsule may be purchased from your
dealer or ordered directly from us. One
scent release capsule is provided with
the unit. These scents are pleasant,
unobtrusive and barely suggestive.
The capsules are made of Polyiff
®
.
Polyiff
®
is produced by IFF, the world’s
largest manufacturer of fl avorings
and fragrances.
To use the scent release function:
The capsule is installed on the right
side of the lower enclosure on the front
of your appliance (see fi g. 1, page 2)
To install, SWITCH OFF the unit.
Remove the capsule from its protective
wrapping. Open the capsule cap by
turning it in the direction opposite to that
indicated by the arrow on the cap
(see fi g. 1, page 2). Insert the capsule in the
cap until the tabs catch the cap (see fi g. 2,
page 2). Insert the complete cap (with the
capsule inside it) into the air purifi er and
turn the cap in the direction of the arrow
(see fi g. 3, page 2). Your air purifi er will now
release a pleasant fragrance during operation.
To replace the capsule, SWITCH OFF the unit.
First remove the cap from the air purifi er by
turning it in the direction opposite to that
indicated by the arrow (see fi g. 1, page 2).
Press the tabs together and remove the used
capsule (see fi g. 4, page 2).
Replace the used capsule with a new one
(see fi g. 3, page 2).
Control switch
BLOWER AT HIGH SPEED
Position • IONIZER IS ON
(middle position)
FOR POWERFUL AIR PURIFICATION
BLOWER AT LOW SPEED
Position
•
To Next Page
Loading...
