Thank you for purchasing our Amcrest 960H DVR!
This quick start guide will help you become familiar with our DVR in a very short time.
Before installation and operation, please read the following safeguards and warnings carefully!
IMPORTANT SAFEGUARDS AND WARNINGS
All installations and operations here should conform to your local electrical safety codes.
We assume no liability or responsibility for any of the fires or electrical shocks caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
Improper battery use may result in fire, explosion, or personal injury.
When replacing the battery, please make sure you are using the same model!
Note: All the installations and operations here should conform to your local electrical
safety rules.
1. CHECK UNPACKED DVR
When you receive the DVR, please check whether there is any visible damage. The protective
materials used for the packaging of the DVR can protect most accidental disturbances during
transportation. Then, open the box to check the accessories. Please check the items in
accordance with the list on the warranty card. Finally, remove the protective film from the DVR.
2. ABOUT FRONT PANEL AND REAR PANEL
For detailed information about the function keys on the front panel and the ports on the rear
panel, please refer to the User’s Manual included in the resource CD. The model number on the
front panel should match what is on your purchase order. The label in the rear panel contains
the serial number you would need to present when we provide after sales service.
To Next Page
Need help?
General
