2827
| Operating Instructions Manual | Operating Instructions Manual
or Picasso Lite Plus. In pulse mode, the wattage is reduced meaning that a setting on 1.0 W in pulse
mode may produce average power of 0.5 W at the tip if the duty cycle is 30ms on and 30ms off (50%
duty cycle).
PICASSO+ | PICASSO LITE+ MODES
The following figure (Figure 15) identifies the various Modes of Operation:
FIGURE 15
GENERAL
• Dimensions (L x W x H): 9.5’’ x 6’’ x 6.2’’ (240 mm x 150 mm x 160 mm)
• Weight: 2.0 lbs (1 kg) ± 20%
• Operating Environment: Temperature 60°F/15°C–90°F/32°C, Humidity 25%–85%
• Operating Pressure: 70.0 kPa–106.0 kPa
• Transport & Storage Env: Temperature 50°F/10°C–122°F/50°C, Humidity 25%–85%
• Transport & Storage Pressure: 50.0 kPa–106.0 kPa
ELECTRICAL
• Power Supply Input Voltage: 100-240V AC 50-60Hz
• Power Supply Output Voltage: +12V DC
• Power Supply Output Current: 5.0A
• Power Supply Max Power Output: 60 Watts MAX
• External Fuses: None
• Main Control: Power Switch
• On/Off Controls: Keyswitch, Power Switch, Emergency Stop
• Remote Interruption: Remote Interlock Connector (Optional)
• Beam Divergence of Collimated Beam (Picasso Plus and Picasso Lite Plus): 11 deg +/- 3 deg
• Cables:
1. AC Power Cord 9.5 Feet (2.89 meters)
2. DC Input Cord 6 Feet (1.82 meters)
3. Delivery Fiber Cable 6.5 Feet (2 meters)
LASER—PICASSO+ (Model P810)
• Laser Classification: IV (4)
• Medium: GaAlAs
• Wavelength: 810 ± 10 nm
• Power Accuracy: ± 20%
• Power Modes: Continuous, Repeat Pulse
• Adjustable Pulse Duration: 20 ms – 9.9 sec
• Pulse Interval: 20 ms – 9.9 sec
• Delivery Fiber Diameter: 200µm - 300µm
• Continuous Mode: Preset to 1.8 W continuous, adjustable from 0.5–7.0 W
• Repeat Mode: Adjustable 0.5–7.0 W, 20 ms – 9.9 sec interval and duration
• Comfort Mode: Preset to 1.5 W 30ms interval and duration
PRODUCT SPECIFICATION
To Next Page
Loading...
