INSTRUCTIONAL MANUAL
Instructions for Nut/Bolt Disassembly
Step 1: Fix the suitable socket to the front
square drive on the 58:1 Assembly and affix
the handle to the square drive on the back of
the 58:1 Assembly.
Step 2: Fix the socket over the
nut/bolt and loosen the nut/bolt one
or two rotations until it moves freely.
Do not exceed more the 45lbs/25kg of
force or damage to the threads, bolt, or
nut may result.
Step 3: Use the socket and handle
with the 1:1 Connection Rod to
remove the loosened nut or bolt.
Nut Buddy Tool Set
To Next Page
Loading...