Need help?Do you have a question about the American Audio DLS 15P and is the answer not in the manual?
Contact details and service hours for customer support inquiries and assistance.
Instructions for carefully checking the shipping carton and unit for damage upon arrival.
Alerts users to the risk of electric shock from internal voltages and advises against opening the unit.
Covers safe operation, cleaning, environment, power sources, and cord protection.
Details the passive speaker's cabinet, connections, rigging points, and power handling capacity.
Details the powered speaker's inputs, controls, EQ, indicator LEDs, and power output.
Guidance on filling out the warranty card and the importance of proof of purchase.
Information on carry cases, rigging hardware, and speaker stands for enhanced functionality.
Details the high-frequency transducer, woofer, rubber feet, pole mount socket, and rigging points.
Explains the function of the transport handle and stacking notches for portability and storage.
Describes the Speakon connectors and 1/4" phono jacks for input and looping.
Explains the locking pin used to secure the speaker in a pole mount configuration.
Covers XLR and 1/4" mic/line input jacks and their corresponding level controls.
Explains line input volume control and the parallel XLR/1/4" line output jacks.
Details the tone controls and the CLIP/POWER indicator lights for monitoring operation.
Information on the protective fuse and the switch for selecting between 115V and 230V.
Details the IEC power connection and the main ON/OFF switch with power indicator.
Shows using balanced XLR cables to link a mixer's outputs to the DLS 15P™™ inputs.
Shows using speaker cables to link an amplifier's outputs to the DLS 15™™ inputs.
Step-by-step connection guide for linking DLS 15P™™ units via line output to line input.
Step-by-step connection guide for linking DLS 15™™ units via input to output connectors.
Details use of third-party brackets, ceiling mounts, and specific American Audio® rigging hardware.
Instructions for pole mounting using the socket, including stand selection and stability tips.
Graphical representation of sound coverage patterns in horizontal and vertical planes at various frequencies.
Shows the speaker's output level (dBSPL) across the audible frequency range.
Detailed process for preparing wires, attaching fittings, and securing connector components.
Defines warranty period, exclusions, responsibilities, and what constitutes a defect.
Procedure for obtaining warranty repair or replacement, including shipping and authorization requirements.
Details physical size, weight, and environmental operating and storage parameters.
Lists frequency response, crossover, impedance, power capacity, and input sensitivity.
Details dimensions, weight, environmental, frequency response, and amplifier section data.
Lists input sensitivity, output levels, signal-to-noise ratio, and distortion characteristics.
General| Woofer Size | 15 inches |
|---|---|
| Frequency Response | 45Hz - 20kHz |
| Output Connectors | XLR |
| Type | Powered Speaker |
| Amplifier Power | Continuous: 250W, Peak: 500W |
| Sensitivity | 98dB |
| Input Connectors | XLR |
To Next Page
