American DJ P36 LED - User Manual

User Instructions
American DJ®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
P36 LED Introduction
©American DJ Supply® - www.americandj.com - P36 LED Instruction Manual Page 2
Rev. 12/06
Unpacking: Thank you for purchasing the P36 LED by American DJ®.
Every P36 LED has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be
sure all accessories necessary to operate the unit has arrived intact. In
the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer sup-
port.
Introduction: The P36 LED is part of American DJ’s continuing pur-
suit for creating high quality affordable intelligent fixtures. The P36 LED
is a DMX intelligent LED Pin Spot. This pin spot is light weight and
compact which makes it a great piece for mobile DJ’s and clubs. This
unit can be used as a stand alone, or a sound-active. The unit can also
be controlled via DMX controller.
Customer Support: American DJ® provides a toll free customer sup-
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
Voice: (800) 322-6337
Fax: (323) 582-2610
E-mail: support@americandj.com
To purchase parts online visit http://parts.americandj.com
Warning! To prevent or reduce the risk of electrical shock or fire, do
not expose this unit to rain or moisture.
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself, doing so will void your manufactures war
-
ranty. In the unlikely event your unit may require service please contact
American DJ®.
PLEASE recycle the shipping carton when ever possible.

Summary

Introduction and Support

Unpacking Instructions

Check shipping carton for damage, inspect fixture, and contact support if parts are missing before returning.

Product Introduction

The P36 LED is a DMX intelligent, lightweight, and compact LED Pin Spot suitable for mobile DJs and clubs.

Customer Support Information

Provides toll-free support number, website for comments, and service hours (Mon-Fri, 9 AM-5 PM PST).

Important Safety Warnings

Do not expose the unit to rain or moisture to prevent electrical shock or fire. No user serviceable parts inside.

General Instructions and Safety

Product Features

Lists key features: Multi-Colors, Color Strobe, Electronic Dimming 0-100%, Built-in Microphone, DMX-512, 6 Channels.

Warranty Registration Process

Details the 1-year limited warranty; register via card or online, freight pre-paid for service items.

Comprehensive Safety Precautions

Covers electrical shock, moisture, proper voltage, cord safety, ventilation, indoor use, and qualified servicing.

Setup and DMX Configuration

Power Supply Requirements

Ensure the source voltage in your area matches the unit's required voltage (120v or 220v).

DMX-512 Protocol Explained

Explains DMX as a universal communication protocol for intelligent fixtures and controllers.

DMX Linking and Addressing

Guide on linking multiple DMX fixtures, using shortest cable paths, and how addressing works in a chain.

DMX Data Cable Requirements

Specifies using standard 3-pin XLR, two-conductor shielded cable for DMX linking.

Line Termination for DMX

Recommends using a terminator (90-120 ohm resistor) on the last unit for stable DMX signal.

5-Pin XLR DMX Connector Conversion

Details conversion for 5-pin XLR connectors to 3-pin DMX lines and provides a cable conversion chart.

Operating Modes and Performance

Sound-Active Mode Operation

Unit reacts to sound and chases programs; set dipswitch #10 to ON.

Auto Mode Operation

Unit automatically chases colors; set dipswitches #9 & 10 ON, adjust speed with dipswitches 1-7.

RGB Mode Operation

Allows static color selection and intensity control using dipswitches #8, 9, 10 and 1-6.

DMX Control Mode Operation

Control individual fixture traits with a DMX 512 controller; uses six DMX channels.

Photometric Performance Chart

Provides lux and beam diameter data based on distance for the P36 LED.

DMX Channel Functions and Cleaning

DMX Values and Functions Chart

Details DMX channel assignments for Red, Green, Blue, Color Macro, Strobing, and Dimming Control.

DMX Channel Interaction Notes

Explains how channels 1-3 interact with channel 4, and channel 5 controls speed when using channel 6.

Fixture Cleaning Recommendations

Guide for cleaning lenses and casing using glass cleaner and a soft cloth to maintain light output.

Troubleshooting and Specifications

Troubleshooting Common Issues

Addresses units not responding to DMX or sound, and provides contact information for unresolved issues.

Product Specifications

Lists working position, voltage, power draw, weight, dimensions, colors, and warranty period.

Company Contact Information

Provides contact details for American DJ World Headquarters and American DJ Europe.

1-Year Limited Warranty Details

Warranty Coverage and Limitations

Details 1-year warranty from purchase date, US-only coverage, and exclusions like misuse or unauthorized repair.

Warranty Service Procedure

Explains sending product to factory, pre-paid shipping, and liability for accessories shipped with the unit.

Warranty Voiding Conditions

Lists conditions that void the warranty: altered serial number, modification, unauthorized service, or poor maintenance.

American DJ P36 LED Specifications

Power

voltage	120V / 230V
power draw	0.1 Amps

Weight and Dimensions

weight	2 lbs / 0.9 kg
dimensions	5" (L) x 5" (W) x 6.125" (H)