American Legend AUSTIN AL1100F

Need help?

Do you have a question about the American Legend AUSTIN AL1100F and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features
Warranty

This document describes the assembly, operation, and maintenance of the Austin 72" Air Hockey Table, featuring an LED Light Strip, manufactured by American Legend (Escalade Sports).

Function Description:

The Austin 72" Air Hockey Table is a recreational game table designed for indoor use. It features an air-powered playfield that allows pucks to glide smoothly across the surface, enhancing gameplay. The table includes an integrated LED light strip for enhanced visual appeal and a digital scoreboard for tracking game progress. It is designed for competitive or casual play, accommodating two players.

Important Technical Specifications:

Model Number: AL1100W/F
Dimensions: 72 inches (length, implied by model name)
Power Source: 120V AC household outlet (for air motor and LED lights)
LED Light Strip: Integrated into the rail, powered by an A/C adapter.
LED Puck Battery: CR2016 Lithium Battery 3V (lasts approximately 7 hours of continuous play, not rechargeable).
LED Striker Battery: Requires batteries (not included).
Hardware:
- H1: 8mm x 55mm Hex Head Bolt (12 pcs)
- H2: M8 Flat Washer (24 pcs)
- H3: M8 Lock Washer (24 pcs)
- H4: 3.5 x 35mm Phillips Flat Head Screw (14 pcs)
- H5: 8mm x 40mm Hex Head Bolt (12 pcs)
- T1: Socket Head Wrench (1 pc)
Main Components:
- P1: Main Cabinet (1 pc)
- P2: End Leg Apron (2 pcs)
- P3: Right Leg (2 pcs)
- P4: Left Leg (2 pcs)
- P5: Leg Leveler (4 pcs)
- P6: End Block (2 pcs)
- P7: Top Panel of Lower Center Support Beam (1 pc)
- P8: Side Panel of Lower Center Support Beam (2 pcs)
- P9: Triangle Leg Support Blocks (8 pcs)
Accessories:
- A1: LED Striker (2 pcs)
- A2: LED Puck (1 pc)
- A3: Puck (2 pcs)
- A4: Felt Pad (may be attached) (2 pcs)
- A5: AC/DC Adapter (1 pc)
Electronic Components:
- C1: LED Rail with Long Wire (1 pc)
- C2: LED Rail with Short Wire (1 pc)
- C3: Control Box (1 pc)
- C4: Sensor with Short Wire (1 pc)
- C5: Sensor with Long Wire (1 pc)
- C6: Blower with A/C Cord (1 pc)
- C7: Scorer (1 pc)

Usage Features:

Assembly: Requires at least two adults. An electric screwdriver can be used with caution (low torque setting) to avoid overtightening. All bolts should be started by hand before tightening.
Scoring System: Features an LED scoreboard with various playing time options (3, 5, 7, 10 minutes), "Tug of War" mode (first to 11 wins), and "Free Play" (no time limit).
Controls:
- POWER button: Turns the scoreboard ON/OFF.
- UP/DOWN buttons: Scrolls through playing time options and adjusts volume level during gameplay.
- PLAY/PAUSE button: Selects current time to start the game and pauses the clock/takes a timeout during gameplay.
- RESET: After a game, pressing any button (except POWER) resets the scoreboard. Holding any button (except POWER) for 3 seconds resets the scorer at any time.
LED Rail Power: A dedicated LED RAIL POWER button controls the LED light strip.
Leg Levelers (P5): Allow for proper leveling of the table on uneven surfaces.
Blower (C6): Provides continuous airflow to the playfield. An ON/OFF switch for the fan motor is located on the blower; it should always be turned off when play is completed.
Electronic Connections: Includes LED rails (C1, C2), sensors (C4, C5), a control box (C3), blower (C6), scorer (C7), and an A/C adapter (A5). Connections are clearly labeled for easy setup.

Maintenance Features:

Cleaning: Use spray furniture polish to clean all exterior surfaces of the table and the playfield (with the air motor running).
Battery Replacement (LED Puck):
1. Remove screws and back cap using a small Phillips screwdriver (not provided).
2. Remove the CR2016 Lithium Battery 3V.
3. Insert a new CR2016 Lithium Battery 3V, ensuring the positive (+) side is on the bottom.
4. Reinstall the back cap and secure screws, ensuring the on/off switch aligns properly with its slot in the LED puck.
- Helpful Hint: Turn the LED puck switch to the "OFF" position when not in use to conserve battery life.
Battery Installation/Replacement (LED Striker): Requires batteries (not included). Ensure correct polarity during installation.
- Helpful Hint: Turn the LED striker switch to the "OFF" position when not in use.
LED Light Strip Replacement:
1. If LED lights are not working, first check that the A/C adapter (A4) is tightly plugged into a live outlet and the control box (C3) connections are snug.
2. If issues persist, disconnect A/C power and contact Customer Service for replacement part(s).
3. To replace the C1/C2 LED Light Strip, carefully remove it from the inner side of the P1 Cabinet.
- Important Safety Note: Flipping the table over requires four or more adults. Do not allow the table to rest on the side of its legs, as this could cause damage. Turn the table over very carefully and set it on its legs, as it is very heavy. Do not hold the legs or lean on them.
General Care:
- Intended for indoor use only.
- Do not sit, climb, or lean on the table.
- Do not drag the table when moving it to prevent damage to the legs.
- Do not set drinks on the table.
- Consider purchasing a table cover to protect and keep the top clean.
Battery Information (General Notice):
- Replace batteries when electrical features are slow or non-functional.
- Do not mix old and new batteries, or different types (Alkaline, Standard, Rechargeable).
- Use Alkaline batteries for maximum performance.
- Do not use damaged batteries.
- Use only batteries of the same or equivalent type.
- Install new batteries according to polarity (+ & -) to prevent damage to internal electrical components.
- Do not short circuit battery terminals.
- Remove exhausted, leaking, weak batteries, and batteries during long periods of non-use to prevent leakage and corrosion.
- Clean battery terminals before installing new batteries.
- Dispose of old batteries safely per local codes.
- Do not dispose of batteries in fire (may explode or leak).
- If using removable rechargeable batteries, they must be charged under adult supervision and removed from the product before charging.
- Regularly examine battery chargers for damage.
- Do not recharge non-rechargeable batteries.
- If the product causes or is affected by local electrical interference, move it away from other electrical equipment and reset (switch off/on or remove/reinsert batteries).

Warranty:

A 90-day limited warranty covers defects in material and workmanship under normal use and conditions. The warranty is void if the product is damaged by accident, unreasonable use, negligence, improper service, failure to follow instructions, or other causes not arising from material and workmanship defects. Escalade Sports will provide replacement components or a comparable product at its discretion. Contact Customer Service for warranty claims.