American Plumber W425F

To Next Page

Demand Water Softeners

Installation and Operating Instructions Models W-425F,

W-426F, W-422F, W-430F, W-450F, W-460F, W-490F and W-430IF

Introduction

Your new softener will provide years of trouble free operation and lengthen the

life of your water using appliances, such as your washer, hot water heater, and

dishwasher. Should you have any problems with your softener, call American

Plumber’s experienced technical staff at 800.863.9392.

NOTE: Not all tools may be necessary for installation.

Read installation procedures before starting to

determine if additional tools are necessary.

W-425F

W-426F

W-422F, W-430F,

W-450F, W-460F,

W-490F

W-430IF

Tools Required

• Pipewrenches • Steelwool

• Screwdriver-at • Emerycloth

• Safetyglasses • File

• Measuringtape • Torch

• Level

• Utilityknifeortube

cutter

Materials Required

• Pipettings • Solder(leadfree)

• Pipe • Flux

• Teon

tape • Valves

• 1/2-inchtube(for

drain)

• Salt

• Groundingstraps

(optional)

Technical Support: 800.863.9392 (M-F 7:30 am - 5:00 pm CST)

 147301RevAJE06

American Plumber W425F - User Manual