American Signature IA34-415 User Manual

06-19-2018
Page 1/5
Thank you for purchasing this quality product. Be sure to check all packing material carefully for
small parts that may come loose inside the carton during shipment.
UNIT SHOULD BE INSTALLED BY 2 OR MORE PERSONS.
BEFORE USING THIS PRODUCT PLEASE READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS.
Save these instructions for future reference.
All Beds need to be set up in the exact final
location so that after full assembly it will not
need to be moved. Moving the bed will cause
the support legs to move out of perpendicular
(90 degree), weaken the support system, and
may allow the bed to collapse.
FOR INDOOR USE ONLY
MADE IN VIETNAM
ASSEMBLY INSTRUCTIONS
R
RR
IA34-407D
IA34-415
COMPONENTS LIST: IA34-415
No.
Description
Sketch
Quantity
1 Headboard
1 PC
2
Left Leg
1 PC
3
Right Leg
1 PC
4
Wood Stretcher
1 PC
5
Center Support Leg
1 PC
TOOLS REQUIRED (NOT PROVIDED)
PHILLIPS SCREWDRIVER
UTILITY KNIFE (FOR CAL KING)
HARDWARE LIST: IA34-406
No.
Description
Sketch
Quantity
I
Hanger Bolt Ø5/16"*3"
8 PCS
J
Half Moon Washer 5/16"
8 PCS
K Hex Nut Ø5/16"
8 PCS
L Hex Wrench 90*25*2mm
1 PC
M Wood Screw M4*1-1/4"
10 PCS
HARDWARE LIST: IA34-407D
No.
Description
Sketch
Quantity
N Bolt Ø1/4"*1-1/4" 8 PCS
O Lock Washer Ø5/16" 8 PCS
P Flat washer Ø5/16 x 3/4"
8 PCS
Q
Allen Wrench 4mm
1 SET
R Wood Screw M4*1
6 PCS
COMPONENTS LIST: IA34-406
No.
Description
Sketch
Quantity
1
Bed rails
2 PCS
2 Slats 5 PCS
COMPONENTS LIST: IA34-407D
No.
Description
Sketch
Quantity
1 Footboard 1 PC
2
Support Leg (for center rail)
2 PCS
3
Decking
3 PCS
4 Center rail
1 PCS
5
Filler
2 PCS
IA34-406
HARDWARE LIST: IA34-415
No.
Description
Sketch
Quantity
A
Bolt Ø5/16"*2" 6 PCS
B
Bolt Ø5/16"*1-1/2" 4 PCS
C Bolt Ø1/4"*1-1/4" 4 PCS
D
Lock Washer Ø
5/16
"
10 PCS
E
Flat Washer Ø
5/16
" *3/4" 10 PCS
F
Lock Washer Ø
1/4
" 4 PCS
G Flat Washer Ø1/4" *3/4" 4 PCS
H Allen Wrench 4mm
1 SET
ITEM NO: IA34-415/406/407D
KING STORAGE BED-ROSALIE CHESTNUT

American Signature IA34-415 Specifications

General

Brand	American Signature
Model	IA34-415
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Tools Required for Assembly

Lists the necessary tools not provided with the product for assembly.

Step 1: Headboard and Leg Assembly

Attach the left and right legs to the headboard using specified bolts and washers.

Step 2: Wood Stretcher Attachment

Connect the wood stretcher to the previously attached legs using bolts and washers.

Step 3: Center Support Leg Installation

Attach the center support leg to the headboard and wood stretcher assembly.

Step 4: Side Rails Preparation

Arrange side rails ensuring slat bearers are positioned in the upper position.

Step 5: Attach Side Rails to Frame

Connect side rails to the headboard and footboard using bolts, washers, and nuts.

Step 6: Center Rail Attachment

Secure the center rail to the footboard and the center support leg.

Step 7: Center Rail Support Legs

Attach the two support legs to the center rail using bolts and washers.

Step 8: Slat Placement and Attachment

Position slats on slat bearers and secure them with wood screws.

Step 9: Decking Installation

Place decking over slats and secure it with wood screws through pre-drilled holes.

Product Functionality Features

Highlights features such as powered USB ports and cedar-lined drawers.