SAVE FOR FUTURE USE
7301997-100 01/20
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2020
NOTE: Pictures may not exactly define contour of china and components.
0611 CORNICE
™
PEDESTAL SINK
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed
properly, please read these instructions carefully before you begin. (Certain installations may require professional help.) Also be
sure your installation conforms to local codes.
!
OBSERVE LOCAL PLUMBING AND BUILDING CODES
Recommended Tools & Materials
Adjustable Wrench
Putty Knife
Channel Lock Pliers
Regular Screwdriver
Phillips Screwdriver
Drill
Basin Wrench
Plumbers' Putty or
Caulking
Tubing Cutter Tape Measure
Pipe Wrench
Hacksaw
Level
ROUGHING-IN DIMENSIONS:
28-3/4"
(730mm)
33-1/8"
(841mm)
5"
(127mm)
17-3/4"
(451mm)
21"
(533mm)
C/L HANGER
OUTLINE OF
PEDESTAL
C/L OUTLET
ROUGH
CENTER OF SLOT
OF HANGER
3/8" (10mm)
COLD WATER
3/8" (10mm)
HOT WATER
C/L OUTLET ROUGH
C/L HANGER
3-1/2"
(89mm)
15-3/4"
(400mm)
11" (279mm)
11"
(279mm)
18-7/8"
(480mm)
7"
(179mm)
5" (127mm)
7-1/4"
(184mm)
22-3/16"
(563mm)
11"
(279mm)
FINISHED FLOOR
4"
(102mm)
To Next Page
Need help?
General
