American Standard Hamilton 4040

To Next Page

HD-73

HAMILTON

TWO-HANDLE KITCHEN FAUCET

4040 Shown.

MODEL NUMBER:

4040 Kitchen Faucet

Metal Lever Handles. Separate Handspray.

Polished Chrome finish.

PRODUCT FEATURES:

Ceramic Disc Valve Cartridges: Assures a lifetime of

smooth handle opertion and drip-free performance.

Cast Brass Waterways with: Strong and durable.

Integral tabs on casting provide a wobble-free installation.

Low Lead: Meets NSF Standard 61/Section 9 & Prop 65

lead requirements.

Simple Installation: Fast and easy one person

installation. Faucet drops in from top. Quick spin nuts secure

faucet in place.

Choice of Finishes: Lifetime finishes won't tarnish

or scratch.

Lifetime Warranty: On function and finish.

4040

Product

Number

Description

Kitchen faucet. Metal Lever handles. Separate Handspray. Polished Chrome finish.

GENERAL DESCRIPTION:

Kitchen faucet on 8" centers. 1/4 turn washerless ceramic

disc valve cartridges - reversible for use on either "hot" or

"cold" side. Durable cast brass waterway with 1/2" male inlet

shanks. 8-3/8 (212mm) long cast brass swivel spout. Metal

escutcheon plate (escutcheon size 10-7/16"L x 2-7/16"W).

2.2gpm/8.3L/min. maximum flow rate. Metal lever handles.

SUGGESTED SPECIFICATION:

Two handle kitchen faucet shall feature a cast brass waterway and cast brass swivel spout. Shall also feature 1/4 turn

washerless ceramic disc valve cartridges that are reversible for use on either "hot" or "cold" side. Fitting shall be American

Standard Model # 4040.

Meets the American Disabilities Act Guidelines and ANSI

A117.1 Requirements for the physically challenged.

FLOW RATE*

GALLONS PER MINUTE

I N L E T P R E S S U R E ( P S I )

*Flow rates shown are for mixed hot and cold.

0.0

0.5

1.0

1.5

2.0

2.5

3.0

10080604020

CODES AND STANDARDS

These products meet or exceed the following

codes and standards:

ASME A112.18.1

CSA B 125

NSF 61/Section 9

ANSI A117.1

8-3/8

(212mm)

2-1/2

(64mm)

(203mm)

1-7/8

(49mm)

1 MAX.

(25mm)

2-7/16

(63mm)

7-1/8

(181mm)

4-1/4

(107mm)

Need help?

Do you have a question about the American Standard Hamilton 4040 and is the answer not in the manual?

Summary

General Description

Product Features

Ceramic Disc Valve Cartridges

Assures lifetime of smooth handle operation and drip-free performance.

Cast Brass Waterways

Strong and durable, with integral tabs for wobble-free installation.

Low Lead Compliance

Meets NSF Standard 61/Section 9 & Prop 65 lead requirements.

Simple Installation

Fast, easy one-person installation. Faucet drops in from top.

Durable Finishes

Lifetime finishes won't tarnish or scratch.

Lifetime Warranty

On function and finish.

Suggested Specification

Codes and Standards