EasyManua.ls Logo

American Standard UY060R9V3W Series User Manual

American Standard UY060R9V3W Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
*UY060R9V3W
*UY080R9V3W
Upflow / Horizontal and Downflow / Horizontal,
Gas-Fired, Direct Vent, 2-Stage Condensing
Furnaces with Variable Speed Inducer
ALL phases of this installation must comply with NATIONAL, STATE AND LOCAL CODES
IMPORTANT This Document is customer property and is to remain with this unit.
Please return to service information pack upon completion of work.
Installer’s Guide
*UY100R9V4W
*UY120R9V5W
*__First letter may be “A” or “T”
A341624P04
UPFLOW
*UY-R9V-V
UPFLOW/HORIZONTAL
*DY-R9V-V
DOWNFLOW
DOWNFLOW/HORIZONTAL
*DY060R9V3W
*DY080R9V3W
*DY100R9V4W
*DY120R9V5W
18- CD20D3- 18
Question and Answer IconNeed help?

Do you have a question about the American Standard UY060R9V3W Series and is the answer not in the manual?

American Standard UY060R9V3W Series Specifications

General IconGeneral
BrandAmerican Standard
ModelUY060R9V3W
CategoryFurnace
Heating Capacity60, 000 BTU
Fuel TypeNatural Gas
Warranty10-year limited warranty

Summary

SAFETY SECTION

CARBON MONOXIDE POISONING HAZARD

Addresses risks and precautions related to carbon monoxide exposure from the furnace.

FIRE OR EXPLOSION HAZARD

Details hazards associated with fire and explosion, and necessary safety measures.

GENERAL INSTALLATION INSTRUCTIONS

LOCATION AND CLEARANCES

Specifies required distances and placement considerations for safe furnace installation.

UPFLOW INSTALLATION

DOWNFLOW INSTALLATIONS

HORIZONTAL INSTALLATION

AIR FOR COMBUSTION AND VENTILATION

OUTSIDE AIR IS RECOMMENDED

Conditions requiring the use of outdoor air for combustion due to environmental factors.

DUCT CONNECTIONS

RETURN AIR DUCT SYSTEMS

Proper methods for connecting return air ducts to the furnace system.

RETURN AIR FILTERS

BOTTOM FILTER RACK INSTALLATION

Step-by-step guide for installing the filter rack in the bottom of the furnace.

FILTER RACK INSTALLATION FOR SIDE RETURN AIR

BLOWER DOOR/HINGE REMOVAL

ALTERNATE UPFLOW FILTER CLIP/BRACKET INSTALLATION

RETURN AIR FILTERS FOR UPFLOW FURNACE IN HORIZONTAL CONFIGURATION

INSTALLING THE FILTER

GENERAL VENTING INFORMATION

HORIZONTAL INSTALLATION

Specific guidance for venting the furnace in horizontal installations.

FURNACE VENT/INLET PIPE INSTALLATION

VENT FITTING MATERIAL – PLASTIC

BONDING OF PVC

Instructions for joining PVC pipe fittings using solvent cement for secure connections.

HIGH ALTITUDE DERATE

HORIZONTAL VENTING

HORIZONTAL VENTING THROUGH WALL

DOWNWARD VENTING

HORIZONTAL VENT CLEARANCES

VENTING THROUGH COMBUSTIBLE WALLS

VENTING THROUGH NON-COMBUSTIBLE WALLS

Procedures for venting the furnace through non-combustible walls, including sealing requirements.

VENTING THROUGH THE ROOF

VENT FITTING MATERIAL - STAINLESS STEEL

VENTING ROUTED THROUGH A MASONRY CHIMNEY

ELECTRICAL CONNECTIONS

FIELD WIRING DIAGRAM FOR VARIABLE SPEED 2 STAGE FURNACE

Diagrams illustrating field wiring for single and two-stage heating/cooling thermostats.

CONDENSATE DRAIN INSTRUCTIONS

ALL HORIZONTAL APPLICATIONS ARE LEFT SIDE DRAIN ONLY

Specific drain routing for horizontal furnace installations.

UPFLOW AND DOWNFLOW VERTICAL CONDENSATE DRAIN

Instructions for vertical condensate drain installation for upflow and downflow models.

GAS PIPING

COMBUSTION AND INPUT CHECK

START-UP AND ADJUSTMENT

PRELIMINARY INSPECTIONS

Initial checks to ensure all components are correctly installed before operation.

LIGHTING INSTRUCTIONS

Procedures for safely lighting the furnace burner.

SEQUENCE OF OPERATION

CONTROL AND SAFETY SWITCH ADJUSTMENTS

AIRFLOW ADJUSTMENT

INDOOR BLOWER TIMING

ABNORMAL CONDITIONS

EXCESSIVE COMBUSTION PRESSURE

Troubleshooting excessive combustion pressure due to venting issues or blocked pipes.

LOSS OF FLAME

Diagnosing and resolving situations where the flame is lost during operation.

POWER FAILURE

How the system behaves and restarts after a power interruption.

GAS SUPPLY FAILURE

Steps taken by the control module when gas supply is interrupted.

INDUCED DRAFT BLOWER FAILURE

Guidance for troubleshooting issues with the induced draft blower.

CONDENSATE DRAIN BLOCKAGE

Identifying and resolving problems caused by a blocked condensate drain line.

RESET AFTER LOCKOUT

RESET AFTER BURNER BOX LIMIT SHUTDOWN

INTEGRATED FURNACE CONTROL RED LED "ERROR" FLASH CODES

FAULT CODE RECOVERY

Procedures for clearing fault codes from the furnace control memory.

Related product manuals