American Standard WILLIAMSBURG 2804 User Manual

2804
Certified to comply with ANSI A112.18.1
Installation
Instructions
Centerset Lavatory Faucet with
Speed Connect™ Drain
Adjustable Wrench Screwdriver Channel Locks
Required tools
Tubing Cutter
1
INSTALL FAUCET
SINK OR
MOUNTING
SURFACE
POP-UP
CABLE
Turn off hot and cold water supplies before beginning.
Insert FAUCET (1) and CABLE CONNECTOR (2) through
mounting holes of Sink or mounting surface.
Fig. A.
Assemble LOCKNUTS (3) onto SHANKS (4) ( from under
side of Sink. Hand tighten firmly.
Fig. B.
2
2
1
4
3
3
4
(HAND TIGHTEN)
M968422Rev.1.2
TM
Fig. A.
Fig. B.
1
Congratulations on purchasing your American Standard
faucet with Speed Connect drain, a feature found only on
American Standard faucets.
*Your new American Standard faucet is designed to work only with the Speed Connect drain. Heplful tips for
removing your current drain can be found in the Troubleshooting section of these instructions.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
Speed Connect™ Drain*
• Fewer parts, installs in less time
• Never needs adjustment
• Guaranteed to seal properly the first time, every time.
Turn off water at
main supply.
CAUTION

American Standard WILLIAMSBURG 2804 Specifications

General

Water Consumption	1.6 GPF
Material	Vitreous China
Color	White
Seat Included	No
Category	Toilets
Style	Traditional
Bowl Shape	Elongated
Flush Rate	1.6 gpf
Product Type	Toilet
Rough-In Size	12 inches
ADA Compliant	Yes
Type	Two-Piece
Bowl Height	16-1/2 inches
Flush Type	Gravity
Flush Valve Size	2 inches

Summary

Install Faucet

Prepare Water Supply

Turn off hot and cold water supplies before beginning faucet installation.

Mount Faucet Body

Insert faucet and cable connector through sink mounting holes.

Secure Faucet Shanks

Assemble locknuts onto shanks from under the sink and hand tighten.

Install Pop-Up Drain Components

Prepare Drain Pop-Up

Install Drain Body

Orient Drain Body

Install Drain Gaskets and Locknut

Install Black Gasket

Install Gray Locknut

Check Gasket Compression

Connect Drain Cable

Attach Cable Connector

Test Pop-Up Drain Functionality

Verify Stopper Operation

Connect Water Supply and Waste

Connect Water Supply Lines

Connect 1/2" IPS flexible supplies or 3/8" O.D. bull-nose risers to faucet.

Connect Drain Tailpiece

Test Installed Fitting and Drains

Test Water Connections

Turn on water supplies and check all connections for leaks.

Check Drain Seal

Fill sink, operate pop-up knob, and check drain stopper for a good seal.

Check Drain Connections

Release pop-up knob and check all drain connections and 'P' trap for leaks.