AMERICANA ALUMA-VENT User Manual

Before You Begin:
 Consult your local building department for any required permits
You may be required to obtain a building permit for this structure. Contact your local building department
for details.
 Read instructions thoroughly
Please read all instructions and notes carefully prior to assembly. Americana is not responsible for replacing
parts lost or damaged due to incorrect assembly.
 A solid attachment is required for all existing structures
All points of attachment to existing structures (such as house, deck, or patio) must be into solid, structurally
sound, and secure material. Example: wood or metal studs, joists, headers, plates, or sills.
Attachment may be made to block, concrete, brick, or stone veneer with suitable anchors, purchased
separately. Note: Failure to properly fasten unit to wall, deck, porch, or patio may result in damage to the
unit, damage to the structure it is attached to, and could cause serious bodily injury.
 Check for all parts
Use the Parts and Hardware List to check for any missing parts. To prevent scratching of painted materials,
place on a tarp or other protective material.
 Assistance may be required during certain steps of assembly.
CAUTION
 Proper site preparation is required.
 Standard shade structure design does not include additional loads such as hanging heavy plants,
swings, or other objects.
 DO NOT stand or sit on the shade structure roof.
 Repair or replace broken parts immediately.
 This kit contains parts with metal edges. Please be careful when handling.
Americana Building Products .
1
10/29/2013
ALUMA-VENT AWNING
REGULAR END STYLE
INSTALLATION INSTRUCTIONS
Contact us at:
1-800-851-0865 or
www.americana.com
Options in your kit:
A. Splice — Pg 16
B. Column — Pg 17
C. C-Channel Brace — Pg 19
D. Runner Brace — Pg 21
E. Kicker Brace — Pg 23
F. Extended Ends — Pg 24
G. Flat Ends — Pg 25
To view installation video,
visit www.americana.com.
Select “Residential Products”.
Select “Installation” at the top
of the page.
Select “Streaming Videos”
then “Aluma Vent Installation.”

AMERICANA ALUMA-VENT Specifications

General

Brand	AMERICANA
Model	ALUMA-VENT
Category	Accessories
Language	English

Summary

Getting Started and Preparation

Before You Begin

Essential pre-installation checks, permit requirements, and safety guidelines.

Tools and Installation Tips

Required tools and important advice for a successful awning installation.

Main Awning Installation

Initial Frame and Louver Assembly

Steps 1-5 for assembling the frame, louvers, and end panels.

End Panel and Runner Attachment

Steps 6-8 for attaching end panels, runners, and flashing.

Mounting and Pan Installation

Steps 9-13 for mounting the awning and installing bottom pans.

Final Apron Bar and Top Pan Assembly

Steps 14-18 for apron bar, clips, top pans, and sealing.

Care and Maintenance

Product Warranty

OPTIONAL SPLICE ASSEMBLY

Splice Flashing

Method for joining two flashing pieces using a splice.

Splice Runner

Method for joining two runner pieces using a splice.

OPTIONAL COLUMN INSTALLATION

Prepare and Mount Columns

Measuring, trimming, and attaching column brackets.

Install Columns

Positioning and securing columns to the awning and mounting surface.

OPTIONAL C-CHANNEL BRACE INSTALLATION

Brace to Runner and Column Attachment

Securing the C-channel brace to runners and the column.

Mount C-Channel Bracket

Attaching the C-channel bracket to the mounting surface.

OPTIONAL RUNNER BRACE INSTALLATION

Attach Runner Braces

Securing runner braces to the awning runners.

Mount Runner Brace Brackets

Attaching wall brackets to the mounting surface for runner braces.

OPTIONAL KICKER BRACE INSTALLATION

Attach Kicker Brace to Runner

Securing the kicker brace to the awning runner.

Mount Kicker Brace Bracket

Anchoring the kicker brace bracket to the mounting surface.

OPTIONAL EXTENDED ENDS ASSEMBLY

Prepare Extension Louvers

Measuring, cutting, and bending louvers for extended ends.

Attach Extension Louvers

Fastening extension louvers to the awning and overhang.

OPTIONAL FLAT ENDS ASSEMBLY

Install Flat End Louvers

Attaching louvers for the flat end style awning.

Complete Flat End Assembly

Finishing the louver assembly for the flat end style.