What to do if AmeriGlide Rave 2 Stairlifts lift fails to operate?
If the AmeriGlide Stairlifts lift fails to operate and the user is unable to exit, another person can use the optional manual override tool to lower or raise the lift to a landing.
What does it mean when my AmeriGlide Rave 2 beeps with a long beep?
A single long beep on your AmeriGlide Stairlifts indicates a fault. The system will reset once the fault is cleared.
What does it mean when my AmeriGlide Rave 2 has a current overload?
If your AmeriGlide Stairlifts experiences a current overload condition, it will emit a single long beep. The system will reset once the fault is cleared.
General| Brand | AmeriGlide |
|---|---|
| Model | Rave 2 |
| Category | Stairlifts |
| Language | English |
Explains safety alert symbols and statements for user attention.
Indicates a hazardous situation that could result in death or serious injury.
Indicates a hazardous situation that could result in minor or moderate injury.
Indicates a situation that can cause damage to the lift or environment.
Advises checking surrounding conditions before installation or servicing.
Identifies the product and its primary use for mobility assistance.
Emphasizes manual importance and prohibits unauthorized alterations.
Instructs owners to fill out and return the warranty form.
Refers to the website for detailed product specifications.
Installer's responsibility for local code requirements and ETL certification.
Lists essential tools needed for stair lift installation.
Inspect box contents and report any missing or damaged items.
Details components found within the rail box.
Lists items included in the rail bracket box.
Lists components included in the chair and footrest box.
Guides on measuring stairs and accounting for obstructions for rail length.
Specifies the need for a dedicated 120V AC 15A electrical circuit.
First steps for installing the rail, opening box, positioning bottom rail.
Explains how to measure and install for zero overrun with obstructions.
Steps for removing, sliding, and securing the chassis onto the rail.
Caution about trapping fingers between rail and chassis.
Instructions for installing plastic rack pieces, cutting rail, and securing limit cam.
Steps to install and adjust the footrest and seat base height.
Warnings regarding connector usage and installation switch disabling.
Step-by-step guide to reconfiguring armrest controls.
Instructions for orienting and attaching folding rail brackets.
Caution about pinching fingers when moving the fork.
Steps to re-program remote controls if needed.
Ensure lift operates correctly with armrest control.
Final instructions for fully tightening rail bracket mounting screws.
Procedures for testing and adjusting travel limits and footrest position.
Detailed steps to test all safety stop switches and their responses.
Final checks including testing all safety switches and seat swivel.
Lists major faults and their corresponding number of beeps.
Lists common minor faults.
Explains the meaning of an intermittent beep indicating a charge station issue.
Instructions for operating the lift manually if it fails.
Caution against operating the lift with the manual override tool engaged.
To Next Page
