Amerihome BS1208 User Manual

ITEM # BS1208 / ITEM # BS1208-R
Bar Stool Assembly Instructions
Max Weight Capacity 330 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
CALL CUSTOMER SERVICE FOR PARTS, SERVICE & TECHNICAL SUPPORT.
If you experience a problem, have questions or need parts for this product, call Customer Service at
1-636-532-9888, Monday-Friday, 8 AM - 4 PM Central Time. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
Support
Cylinder (B)
Base
(D)
Seat (E)
Handle
Foot Cap
(G)
Foot
Rest
(C)
Remove Black Cap
Discard Before Assembly
ATTENTION!

Amerihome BS1208 Specifications

General

Brand	Amerihome
Model	BS1208
Category	Indoor Furnishing
Language	English

Summary

Assembly Instructions

Step 1: Attach Base Plate and Leg

Use hex wrench to attach base plate and leg to seat underside using hex bolts.

Step 2A: Handle Hydraulic Mechanism Protection

A black cap protects the hydraulic mechanism on the support cylinder.

Step 2B: Remove Black Cap

Remove the black cap and discard; the orange hydraulic button will become visible.

Step 3: Insert Support Cylinder

Insert the support cylinder into the base plate and leg, then press firmly.

Step 4: Set Foot Cap and Base

Place foot cap over base hole, insert support cylinder into base center hole, and press firmly.

Step 5: Attach Seat Top Assembly

Guide seat top assembly over support cylinder and press down firmly on the seat.

Seat Height Adjustment

Grasp handle to raise seat without weight. Raise handle and apply weight to lower seat.

Disassembly Instructions

Separate Base from Seat and Cylinder

Turn stool upside down. Hit metal clip on base bottom with rubber mallet to disengage locking mechanism.

Separate Seat from Support Cylinder

Turn stool upside down, strike edge of support cylinder where it meets support to separate.