Amerihome ATABLE User Manual

ATABLE Bar Table Assembly Instructions
Max Weight Capacity 200 Lb
READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
This manual provides important information on proper operation & maintenance. Every effort has been
made to ensure the accuracy of this manual. These instructions are not meant to cover every possible
condition and situation that may occur. We reserve the right to change this product at any time without
prior notice.
IF THERE IS ANY QUESTION ABOUT A CONDITION BEING SAFE OR UNSAFE,
DO NOT USE THIS PRODUCT!
DO NOT RETURN THIS PRODUCT TO THE RETAILER - CONTACT CUSTOMER SERVICE.
If you experience a problem, have questions or need parts for this product, visit our website
http://www.amerihomebrand.com
or call Customer Service at 1-888-287-6981, Monday-Friday, 8 AM - 4 PM
Central Time, or email: info@amerihomebrand.com. A copy of the sales receipt is required.
KEEP THIS MANUAL, SALES RECEIPT & APPLICABLE WARRANTY FOR FUTURE
REFERENCE.
Base (C)
Tabletop (D)
Handle
Table Plate and Leg (E)
Screws
(F)
Foot Cap
(B)
Support Cylinder
(A)
201301
Remove Black Cap
Discard Before Assembly
ATTENTION!

Amerihome ATABLE Specifications

General

Brand	Amerihome
Model	ATABLE
Category	Indoor Furnishing
Language	English

Summary

General Information and Safety

Usage and Safety Warnings

Read all instructions and warnings before use. Do not use if any condition is unsafe.

Customer Service Contact

Contact customer service for problems or parts; do not return to retailer.

Parts Identification Diagram

Visual guide identifying all components (A-G) for assembly.

Assembly Instructions

Step 1: Prepare Components

Remove and discard the black cap from the table leg assembly before starting.

Step 2: Attach Table Plate to Tabletop

Use hex wrench and bolts to secure the Table Plate and Leg (E) to the Tabletop (D).

Step 3: Connect Support Cylinder to Base

Fit the foot cap onto the base and firmly insert the Support Cylinder into the base.

Step 4: Assemble Tabletop and Base

Guide the tabletop assembly over the support cylinder and press firmly down.

Tabletop Height Adjustment

Instructions on how to raise or lower the tabletop using the handle.

Disassembly Instructions

Separate Base from Support

Disengage the base locking mechanism by striking the metal clip with a mallet.

Remove Tabletop from Support

Strike the edge of the support cylinder to detach the tabletop assembly.