9
step
and/or serious injury.
Failure to do so could cause instability, product collapse,
All nails must be driven into the parts straight and centered.
Please make sure that the Back Panel is attached securely.
WARNING
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Attach the back panel so that the
bottom edge is even with the bottom
(D) and aligned side to side.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
(5) x32
nail
16
B
D
5
back
panel
To Next Page
Loading...
