AmerTac zenith VN1ANTP2

To Next Page

HDTV

Designed For

VHF/UHF

TV Antenna

Digital and HDTV Compatible

Improved Reception for Channels 2 to 69

Receives local HD and Digital TV broadcast signals for free

Adjustable VHF dipoles extend to improve reception

UHF loop for improved reception of channels 14-69

Non-scuff base protects cabinets and TVs

Includes 58" coax cable

VN1ANTP2

Reception Frequency

VHF (47

230MHz) / UHF (470

~860MHz)

Impedance

75 Ohms

Zenith is a registered trademark of Zenith Electronics LLC and used under license.

Zenith est une marque de commerce déposée de Zenith Electronics LLC et utilisée sous licence.

Zenith es una marca registrada de Zenith Electronics LLC y se utiliza bajo licencia.

Connect to TV

-Connect coaxial cable connector to TV's RF input

Adjust Antenna

-Rotate antenna base to improve UHF signal

-Extend and move dipoles to improve VHF reception

Note: If antenna is not receiving correctly, try placing in different position.

Installation

250 Boulder Dr.

Breinigsville, PA 18031

610-336-1330

www.amertac.com

Made in China /

Fabriqué en Chine /

Fabricado en China

I18-0109-A

Need help?

Do you have a question about the AmerTac zenith VN1ANTP2 and is the answer not in the manual?

Summary

VHF;UHF TV Antenna Features

Digital and HDTV Compatibility

Improved reception for channels 2 to 69, receiving local HD and digital TV broadcasts.

Adjustable VHF Dipoles

Extendable dipoles for improved reception of VHF channels.

UHF Loop Design

UHF loop for improved reception of channels 14-69.

Protective and Included Accessories

Non-scuff base protects cabinets and TVs; includes 58-inch coax cable.

Antenna Installation Guide

Connect Antenna to TV

Connect coaxial cable connector to the TV's RF input.

Adjust Antenna for Optimal Signal

Rotate base for UHF, extend dipoles for VHF reception.

Technical Specifications

Reception Frequency Range

VHF (47~230MHz) and UHF (470~860MHz).

Impedance

75 Ohms.