EasyManua.ls Logo

Ametek Magnetrol 3 Series - Actuating Levels & Specific Gravities Data

Ametek Magnetrol 3 Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
46-622 Series 3 Liquid Level Switches ASME B31.3 Construction
23

5.2 Specifications
 
For float operated units, minimum specific gravities and actuating levels vary depending upon the
material of construction code used with the unit.
N
OTE: The minimum specific gravities and actuating levels shown are for single switch units with 1" process
connections only. Minimum specific gravities and levels will change for multistage units and levels
will change for units with 1
1
2 or 2" process connections. Consult factory for these changes.
*The level decals on the control identify the actuation levels for units with three switches at the corre-
sponding minimum specific gravity of the three switch configuration.



 








   
B35 0.69 3.06 (78) 3.62 (92) 0.72 3.06 (78) 3.79 (96)
C35 0.57 3.15 (80) 3.86 (98) 0.59 3.09 (78) 3.96 (101)
G35 0.55 3.25 (82) 3.83 (97) 0.56 3.20 (81) 3.90 (99)
K35 0.40 3.56 (90) 4.06 (103) 0.40 3.40 (86) 4.02 (102)
L35 0.41 3.31 (84) 3.98 (101) 0.43 3.34 (85) 4.14 (105)
V35 0.71 3.06 (78) 3.81 (97) 0.75 3.00 (76) 3.64 (92)
Z35 0.66 2.94 (75) 3.63 (92) 0.68 2.90 (74) 3.47 (88)






 










   
B3F
150 0.78 3.00 (76) 3.87 (98) 0.83 2.97 (75) 4.05 (103)
300 0.66 2.17 (55) 2.97 (75) 0.66 2.10 (53) 3.10 (79)
600 0.66 2.06 (52) 3.12 (79) 0.71 2.19 (56) 2.94 (75)
G3F
150 0.41 3.58 (91) 4.26 (108) 0.43 3.61 (92) 4.42 (112)
300 0.55 3.52 (89) 4.10 (104) 0.56 3.47 (88) 4.18 (106)
600 0.70 4.00 (102) 4.81 (122) 0.76 4.13 (105) 4.75 (121)
K3F
150 0.33 3.08 (78) 3.64 (92) 0.33 2.97 (75) 3.67 (112)
300 0.40 3.05 (77) 3.56 (90) 0.40 2.96 (75) 3.57 (93)
600 0.60 3.30 (84) 3.85 (98) 0.62 3.44 (87) 3.88 (99)
Z3F
600 0.67 3.10 (79) 3.80 (97) 0.70 3.12 (79) 3.68 (93)
900 0.67 3.10 (79) 3.80 (97) 0.70 3.12 (79) 3.68 (93)
Levels ± 0.25" (6 mm)
Levels ± 0.25" (6 mm)

Table of Contents

Related product manuals