SPECIFICATIONS
Amplifier output power: left/right 1.5Wx2, subwoofer 3.5Wx1
Amplifier input sensitivity: ≤400m V
Amplifier SNR:≥ 70dB
Frequency response:70Hz~20KHz
Power voltage: AC100-240V, 50/60Hz
Battery: 7.4V 1800mHA
Battery time 10hours
Battery charging time: 4-6hours
Blue tooth range: 7-10M(23-33FT)
Bluetooth version: 3.0 2.4G Support A2DP
M1
5
6
9. Built-in battery : when using the built-in battery to play music, the unit will
manage the battery use automatically, when the power is lo w, th e un it w il l
decrease the volume to ensure the sound quality and longer play time; when
the power is not enough to support normal play, the indic ato r will flash and
the unit will be switch to standby, please use the pro p er po w e r adapter to
charge the unit for normal use.
10.Charging:, please use the supplied power adapter to charging, the green
indicator on the back of the uni t will b e flashi ng durin g c harging. When
the battery is fully-charged, the green indicator will stop flashing.
AME THYST M1
6.Re-pai ring: To t ouc h th e PAIR but ton on the cont rol pane l for re -pa iring ,
me anw hile the indicat or will flash, and there is voice prompt that the unit
is ready to be paired. Please follow step 3 to do pairing.
7.AU X i nput pla y: Switc h the M1 on, tou ch the I NPUT button on the control
pa n el, the ind i cato r w i ll flash once, a nd the u nit will be conn ected to the
AUX channel play. The music in mobiles, MP3, PC, etc can be played through
3.5 mm a udi o c able. Pr ess i npu t again w ill turn t o blueto oth channel and
reconnect automatic.
PAIR
INPUT
8.DC5V Charging output: the unit provide standard USB port charging, with
DC5V 1A charg ing current , which can charge mobiles, MP3, et c throug h
USB cable.。
FLASH
1.The Bluetooth device can't find the speaker, the speaker may still connect
with last Blue tooth device or another device are searching and connecting
with speaker at same time. Now you need to operate as Step 3 to re-connect it.
2. If you hear inter mit tent sou nd or no sound f rom s pea ker after connection.
Please check if the distance from you and speaker are over 10M(33FT)
3.To avoid echo when using the speaker phone function, do not place your
phone near or in front of the M1 speaker.
4.For best results it is recommended that Bluetooth enabled music player that
supports Apple iPod, iPhone, Samsung players, and Window media players
be used. Other, third party supported media players may not support smooth
song change functions, which may cause sound distortion or interruption
between song tracks.
5.Please use power ad aptor wh ich prov ide from Lanchiya to avoid damage
your speaker.
6.Please connect and disconnect adaptor when the switch is in OFF position
7.if your mobile doesn't su pport mo bile rin g transf er, you can only hear the
M1 Built in ring voice “ incoming call”, when calling come in.
NOTE
*
AMETHYST IN NOVATIO NS CORPORATI ON
14731-J Frankli n Avenue Tustin, CA. 92 78 0
Phone: 714-731- 2921
Website: ww w.amethystinno va tionscorp.com
5. Spe aker Phone operat ion: When the call comes in during playi ng mu sic,
answer the call by touching the button 【PHONE】on the touching panel and
talk facing the top panel; or dial the receiver button on the mobile to use mobile
to answer the call. Press and hold on 【PHONE】for 2 seconds to hang up the
phone during calling.
PHONE
To Next Page
Need help?
General
