Need help?Do you have a question about the Amewi HYPER GO and is the answer not in the manual?
Welcome message and introduction to the Amewi company.
Technical specifications for the maximum transmitting power of the device.
Details product compliance with European directives and provides contact for inquiries.
General warnings regarding product safety, usage, and potential hazards.
Important information and safety guidelines for battery usage and disposal.
Guidelines for proper disposal of electronic parts and batteries according to regulations.
Key warnings about product operation, including age restrictions and handling.
Prohibits product modification, improper, or illegal usage that could cause harm.
States product compliance, age limitations, and manufacturer liability.
Advises on safe operating environments and conditions to avoid risks.
Safety advice for operation, including transmitter handling and shutdown procedures.
Instructions for powering on the transmitter and the car's main switch.
Diagrams receiver components, power interface, and LED status indicators.
Identifies and labels the various controls and functions on the transmitter.
Explains how to use the ST.TRIM knob to adjust steering alignment.
Describes how to use the Fn button to control the car's lights.
Details the different settings for the power/speed switch.
Explains the meanings of the transmitter's indicator light states.
Illustrates how to control steering left, center, and right.
Explains throttle control for forward, brake, and reverse functions.
Instructions for installing the wheelie bar to the rear of the car.
Instructions for installing the rear wing to the rear shock tower.
Step-by-step guide for opening the transmitter and inserting AA batteries.
Instructions for connecting the receiver plug to the battery and securing it.
Details battery type, charging time, LED status, and recommended charger.
Step-by-step instructions for securing the car body using the locking mechanism.
Instructions for aligning body holes and using clips to lock the car body.
Instructions for aligning body holes and using clips to lock the car body.
Diagrams and lists parts and screws for assembling the front bumper.
Diagrams and lists parts and screws for assembling the front bumper.
Diagrams and lists parts and screws for assembling the front swing set.
Diagrams and lists parts and screws for assembling the rear swing set.
Diagrams and lists parts and screws for assembling the differential set.
Diagrams and lists parts and screws for assembling the main driving set.
Diagrams and lists parts and screws for assembling the servo set.
Diagrams and lists parts and screws for assembling the steering mechanism.
Diagrams and lists parts and screws for assembling the motor.
Instructions for adding shock oil and adjusting the shock absorber's spring preload.
Diagrams and lists parts and screws for assembling various chassis components.
Diagrams and lists parts and screws for assembling suspension arms and shafts.
Diagrams and lists parts and screws for assembling suspension components.
Diagrams and lists parts and screws for specific assemblies on models 22627 & 22628.
Diagrams and lists parts and screws for specific assemblies on model 22629.
Diagrams and lists parts and screws for installing wheels.
General| Drive | 4WD |
|---|---|
| Motor Type | Brushed |
| Remote Control Frequency | 2.4 GHz |
| Battery Capacity | 1500mAh |
| Material | Plastic and metal |
| Remote Control Range | 100 m |
| Suspension | Yes |
To Next Page
