AMG150
amgsystems.com
AMG150 SeriesAMG150 Series
Industrial 2-Port PoE InjectorIndustrial 2-Port PoE Injector
Installation Manual - HardwareInstallation Manual - Hardware
INTERFACE CONNECTIONS
① Insert the incoming Cat5/6
data cable into either RJ45 port.
② Insert the outgoing Cat5/6 PoE
cable into either RJ45 port.
Note: PoE can be delivered from
ports P1 & P2 at the same time
allowing for up to 2 PoE devices to
be powered.
PORT SPEEDS
Example part code:
AMG150-2GAT-P60
Character RJ45 Port Speed
F 10/100 Base-T(X)
G 10/100/1000 Base-T(X)
POE CAPABILITIES
Example part code:
AMG150-2GAT-P60
Characters PoE Standard Supported
None Non-PoE Model
AT IEEE 802.3at 30W Port
BT IEEE 802.3bt 60/90W Port
Characters PoE Budget
P30 30W Max
P60 60W Max
P90 90W Max
P180 180W Max
Check the product label to determine
the PoE power supported on each port
and the units total maximum PoE budget.
IEEE 802.3at Models
Type 1 & 2 PoE support
Mode A PSE only
IEEE 802.3bt Models
Type 1, 2, 3 & 4 PoE
support. Mode A
and/or Mode B PSE
Ensure the PSU size
used is at least equal
to the maximum PoE
budget gure.
www.amgsystems.com
D33205-02
AMG Systems Ltd. 4 Pioneer Way, Castleford, WF10 5QU, UK T: +44 (0) 1767 600 777 E: technical@amgsystems.com
AMG Systems Inc. 62 Spring Hill Road, Trumbull, CT 06611, USA T: +1-855-AMGPOE1 (855-264-7631)
To Next Page
Need help?
General
