AMGO A240 - Connecting and Installing Lift Cables

8
E. Connecting the cables
1．Connect the cables under step a to f (See Fig. 13).
d. Cable pass through
the small pulley in
another column
c. Pass through the
cable from the
small pulley
a. Cable passes through
the carriage
e. Pull the cable from
bottom to top and
pass through the
cable from big pulley
f. The fitting of cable pass
through the hole of the
carriages and be screwed
with two cable nuts
b. Push the carriages higher than
chain pulley, cable pass through
the top of the carriages and pass
through the hole of the bottom
steel plate of the carriages
Fig. 13
All manuals and user guides at all-guides.com