amiad ADI-P Quick Guide

ADI-P Quick Guide 910101-000990 / 04.2020 Page 1 of 4
Quick Guide
ADI-P: Smartphone Operated Controller for Filtration Systems
Introduction:
Thank you for purchasing the ADI-P Controller - a smartphone operated controller for filtration
systems. The system consists of two major components, the ADI-P Controller and the ADI-P Mobile
Application.
For a complete guide for using your ADI-P controller please refer to the ADI-P IOM
, available for
download on our website (Download center/Products), or scan the QR code.
This Quick Guide provides the “getting started” instructions for a new filtration system which is
equipped with the integral ADI-P controller.
Important: If your ADI-P controller was supplied as a standalone device for controlling existing filtration systems,
please first refer to the Installing the ADI-P Controller on an Existing Filter chapter in the ADI-P IOM and make sure
to install the controller properly before attempting to operate the system.
Safety First: Before starting, read the Safety Instructions chapter in the ADI-P IOM.
Make sure that you understand and comply with all the relevant safety instructions.
Getting to know the ADI-P Controller:
1. ADI-P panel for manual flushing button and indication LEDs
2. 3-Way 12VDC solenoid #1 – latch
3. 3-Way 12VDC solenoid #2 – latch (dual solenoid only)
4. Solenoids' manual operation handles
5. ADI-P cover
Dual solenoid controller
Single solenoid controller

amiad ADI-P Specifications

General

Brand	amiad
Model	ADI-P
Category	Controller
Language	English