Why has my Amibot Vacuum Cleaner lost suction?
If your Amibot Vacuum Cleaner loses suction, the dust bin may be full. Empty the dust bin and clean the motor and filters. Also, the central Animal brush or the side brushes might be blocked. Remove any hair and debris from the brushes, and check for any dirt obstructing the robot.
What to do if my Amibot Vacuum Cleaner does not switch on?
If your Amibot Vacuum Cleaner doesn't switch on, first ensure that the power button is switched to 'ON'. If it still doesn't turn on, the battery may be depleted. Charge the robot using its home base or by plugging it into the power cable.
What to do if my Amibot Vacuum Cleaner does not move correctly?
If your Amibot Vacuum Cleaner isn't moving correctly, the floor might be wet; in that case, clean the floor. Alternatively, the dust bin may not be attached correctly; remove and reinsert the dust bin. It could also be that the central Animal brush is not correctly inserted; remove and reinsert the brush in its cavity.
Why does the remote control for my Amibot Animal not work?
If your Amibot Vacuum Cleaner remote control isn't working, the batteries may need replacing. Try changing the batteries. If that doesn't solve the issue, the remote control might be broken and need to be replaced.
How to fix Amibot Vacuum Cleaner that is hard to manoeuvre?
If your Amibot Vacuum Cleaner is hard to maneuver, the wheels may be jammed. Clean the vacuum wheels and remove any hair or debris caught around them.
Instructions for charging the robot's battery.
How to use the robot for vacuuming.
Steps to turn on and begin robot operation.
Lists common issues, causes, and solutions.
Guidelines for safe operating environments.
General| Remote Control | Yes |
|---|---|
| Scheduling | Yes |
| Auto Recharge | Yes |
| Type | Robot Vacuum |
| Filter Type | HEPA |
| Dimensions | 320 x 320 x 75 mm |
To Next Page
