Amica 12262.3eETbDHbVlS User Manual

14
OPERATION
Semi–automatic operation
If the oven is to be switched o󰀨 at a given
time, then you should:
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
Press sensor MENU until the display will
show:
Set the required time using sensors
< and >, within a range from 1 minute to 10
hours.
The set time will be introduced to the memory
after approx. 7 seconds and the display will
show AUTO function.
When the set time has passed the oven is
switched o󰀨 automatically, the alarm signal
is activated and the signal function AUTO
ashing again;
Set the oven function knob and the tem-
perature regulator knob to the switched–o󰀨
position.
Press sensor MENU, < or > in order to switch
o󰀨 the signal; the signal function will go out
and the display will show the current time.
Caution!
In ovens equipped with one control knob,
the oven function knob is integrated with the
temperature regulator knob.
Automatic operation
If the oven is to be switched on for a specied
period of time and switched o󰀨 at a xed hour
then you should set the operation time and
the operation end time:
Press sensor MENU until the display will
show:
Set the required time using the sensors
< and > within a range from 1 minute to 10
hours.
Press sensor MENU until the display will
show:
Set the switch–o󰀨 time (operation end time)
using sensors < and >, which is limited to a
period of 23 hours and 59 minutes from the
current time.
Set the oven function knob and the tem-
perature regulator knob to the setting at which
you want the oven to operate.
The signal lights by and are now on;
the oven will start operating from the point
when the di󰀨erence between the set op-
80 80
MENU
80 80
MENU
88 80
MENUMENU

Amica 12262.3eETbDHbVlS Specifications

General

Brand	Amica
Model	12262.3eETbDHbVlS
Category	Oven
Language	English