66
- Remove all packaging materials and components.
- Check the oven for damage such as dents or door misalignment or breakage.
- Remove any protective lm from the surface of the cabinet.
- Do not install the oven if it is damaged.
Installing
1. The appliance is designed for home use only
Select a level surface to ensure sufcient space for the inlet and outlet ventilation openings.
The required distance between the oven outer surfaces and adjacent walls (or appliances) is presented on the above
gure. Do not remove the legs located in the bottom of the appliance.
Blocking the inlet and outlet openings may damage the microwave oven. Place the oven as far away from radio and
television as possible. Operating microwave oven may cause interference to radio and television reception.
2. Insert the oven power plug into a standard household wall socket. Make sure beforehand whether voltage and
frequency are the same as on the oven’s rating plate.
Do not install the oven on the gas hob or other heat producing appliance. In the event of such installa-
tion, the oven may be damaged and void the warranty.
EN
To Next Page
Loading...
Need help?
General
Weight and Dimensions
