Why is my Amica AWDI814D Washer/Dryer simultaneously intaking and draining water?
If your Amica Washer/Dryer is simultaneously intaking and draining water, check that the end of the drain hose is higher than the level of the water in the appliance; the hose should be at a height of 0.6m-1m.
Why are there short breaks during the wash cycle of my Amica Washer/Dryer?
Short breaks during the wash cycle of your Amica Washer/Dryer can occur because the water in the appliance is being automatically refilled or due to a pause caused by the removal of excess foam.
General| Brand | Amica |
|---|---|
| Model | AWDI814D |
| Category | Washer/Dryer |
| Language | English |
Guidelines on detergent use and ensuring no foreign objects are loaded.
Importance of leveling and stability checks for safe operation.
Steps to remove locking bolts and packaging before first use.
Instructions for placing the appliance on a solid surface and adjusting legs.
Guidance on connecting the water inlet hose, pressure, and cold water supply.
How to properly connect and position the drain hose for effective water removal.
Requirements for safe electrical connection, socket accessibility, and fuse protection.
How to select wash programmes and adjust water temperature settings.
Options for setting spin speed and soil level for optimal washing.
Step-by-step guide to selecting a programme and starting the appliance.
A guide to identifying and resolving common issues like non-operation, leaks, or poor spinning.
Instructions on how to clean the pump filter to ensure proper water drainage.
To Next Page