What to do if my Amica AWI614S Washing machine is vibrating?
If your Amica washing machine is vibrating, make sure the transport safety devices have been removed. Level the appliance and secure the legs by tightening the nuts.
What to do if my Amica AWI614S appliance does not fill with water?
If your Amica washing machine isn't filling with water, first, turn on the water valve. Then check the program setting, water pressure and ensure the water supply hose is correctly connected and not bent or blocked. Also, ensure the appliance door is closed.
Why is there foam from the detergent drawer of my Amica Washing machine?
If you see foam coming from the detergent drawer of your Amica washing machine, try reducing the amount of detergent you're using. Also, check the water hardness, the amount of detergent, and the type of detergent used in the drum.
What to do if there are water outflow problems with my Amica AWI614S?
If you're experiencing water outflow problems with your Amica washing machine, check the pump filter and the outlet lead. Also, verify that the height of the outlet hose is between 0.6m and 1m from the bottom of the washing machine.
What does E03 mean on my Amica AWI614S?
E03 on your Amica Washing machine indicates improper water outflow. Ensure the drain hose is not clogged, and check the pump and water filter.
What does E01 mean on my Amica Washing machine?
E01 on your Amica Washing machine means the door is ajar. Ensure the door is locked and that laundry is not jammed in the door.
What does E02 mean on my Amica AWI614S Washing machine?
E02 on your Amica Washing machine indicates low pressure or no water in the machine. Unscrew the water valve and check the water inlet hose, filter, and water pressure.
What to do if my Amica AWI614S washing is not properly rinsed?
If your Amica washing machine isn't rinsing properly, use the correct amount of cleaning agent, depending on how dirty the washing is and the hardness of the water, according to the instructions on the cleaning agent’s packaging. Also, clean the pump filter.
What to do if my Amica AWI614S load in the appliance has not been spun?
If the load in your Amica washing machine hasn't been spun, try replacing the load evenly in the drum and clean the pump filter.
Why is my Amica AWI614S not working?
If your Amica Washing machine isn't working, make sure the tap is on, clean the mesh filter on the supply hose, close the appliance door, and press the Start/Pause button.
General| Brand | Amica |
|---|---|
| Model | AWI614S |
| Category | Washing machine |
| Language | English |
To Next Page