83
Gas connection
Caution!
The cooker should be connected to
a gas supply of the particular type
of gas that the appliance is manuf-
actured to function with. Information
about the type of gas that the cooker
has been adapted to by the factory is
shown on the data plate. The cooker
should be connected exclusively by
an appropriately authorised tter and
only he or she has the right to adapt
the cooker to a dierent type of gas.
INSTALLATION
Fitting guidelines
A tter should:
have a gas tter’s authorisation,
be acquainted with the information in-
cluded on the data plate of the cooker
about the type of gas to which the cooker
is adapted; the information should be
compared with gas supply conditions at
the place of installation,
check:
- airing eciency, that is eciency of air
exchange in the rooms,
- tightness of gas tting connections,
- eectiveness of all functional elements of
the cooker,
- if the electricity supply is adapted to func-
tion with a safety ground lead (zero).
provide the user with a connection certi-
cate and give him or her instructions in
cooker use.
Mounting the overturning prevention
bracket.
The bracket is mounted to prevent overtur-
ning of the cooker. When the overturning
prevention bracket is installed, a child who
climbs on the oven door will not overturn the
appliance.
Cooker, height 850 mm
A=60 mm
B=103 mm
Cooker, height 900 mm
A=104 mm
B=147 mm
To Next Page
Loading...
