FAILURE TO FOLLOW THESE SAFETY INSTRUCTIONS MAY RESULT
IN PERSONAL INJURY OR PROPERTY DAMAGE.
Battery Maintenance
• Clean any corrosion on the connections.
• Examine cord periodically for cracking or damage.
• Be extra cautious not to drop a metal tool onto the batteries.
• Remove jewelry and watches.
• A spark near the battery may cause explosion.
To Reduce Risk of Spark:
1. Prevent external damage to AC and DC cords.
2. Connect DC wires to the batteries before connecting charger AC supply cord to the AC electrical outlet.
3. When disconnecting charger, always do so in reverse sequence of connecting procedure.
Break first connection as far away from battery as possible. Distance reduces the chance of
explosion if a spark is generated and gas is present.
Battery Precautions
• Charge batteries supplied on cart with Amigo "original equipment charger."
• Charge batteries fully in a dry location.
• If you remove the batteries from the Amigo, put them on a surface that cannot be damaged by acid fumes.
Whenever a battery is charged and discharged through a cycle, it breathes. The breathing of the
battery emits acid fumes and may mark surfaces it rests on for long periods of time.
• Never smoke or allow an open flame in the vicinity of the battery.
• Use charger for charging batteries only. It is not intended to supply power to
an extra-low-voltage electrical system or to charge dry cell batteries.
• Never charge a frozen battery.
• Do not operate the charger in a closed-in area or restrict ventilation in any way.
Figure 5
Battery Specifications
For lithium-ion battery option, contact Amigo Mobility
• 12-volt
• 18 amp-hour minimum
• AGM (absorbed glass mat)
• Deep cycle
• Terminal type: M6 or 1/4 - 20 female threaded
non - ferrous plated metal
• UL recognized component
5 www.amigoshopper.com
TO AVOID DAMAGE TO BATTERIES DURING STORAGE, DO NOT PLACE THEM WITH
THE POSITIVE + AND NEGATIVE TERMINALS NEXT TO EACH OTHER FIGURE 5.
To Next Page
Loading...
Need help?
General
