Amina S - Updating Firmware; RDC-DD Leakage; EV Error; General Error

14 15
1
2
Prepare and secure power cable.
Strip power cable about 10cm
above the inlet hole. (1)
Secure cable with the supplied cable
clamp and two 12mm screws. (2)
Forbered og fest installasjonskabel.
Avisoler kabelen ca. 10cm over
inntakshullet. (1)
Fest kabelen med kabelklemmen
og to 12mm skruer. (2)
x 2x 1
4