4 1
2
3
5
6
Important - Safety instructions
• Read these instructions carefully and keep for future
reference. Note all warnings.
• The product contains no user-serviceable parts. Refer all
servicing to qualified service personnel.
• Handle the product with care and do not attempt to
dismantle the product.
• Do not expose the product or its accessories to any liquids,
rain or moisture.
• Do not locate the product near a heat source and do not
block ventilation holes: the product will become warm
during operation. Allow at least 10 cm (4”) around the
product for air circulation.
• Do not place the product where it may be subject to physical
shock, vibration or where the product may fall over.
• Do not place the product on soft furnishings or carpets.
• Only use the power supply provided by the manufacturer.
The use of any other type of power supply may invalidate
any approval or warranty applying to the product and may
be dangerous.
• Protect the power supply cord from damage.
• Before disconnecting the device from the power supply
cord, first remove the power cord from the main outlet.
• Disconnect the product from the mains supply if left unused
for long periods of time or during electrical storms.
• Disconnect the product before cleaning, and use a dry cloth
only.
• Only use attachments and accessories specified by the
manufacturer.
• The product is for indoor use only.
1. Power/Activity LED and IR receiver.
Warning! Before connecting or disconnecting any cable, switch
off all system devices (TV, A/V Amplifier, etc.) and disconnect
from the main electrical supply.
The GO Android TV Box provides options for connecting audio
and video to your TV:
HDMI (recommended): Best quality. Connect an HDMI cable
to the HDMI output of the GO Android TV Box and to the HDMI
input of your TV.
Analogue A/V: Good quality. SD only composite with analogue
audio left/right.
1. DC power input 5V 2A.
2. HDMI port.
3. Analogue A/V output (adapter available as an optional
extra).
4. Ethernet port.
5. 2X USB port. DO NOT use this port for Powered USB.
Use for external storage media such USB flash drive
(external storage media must be formatted as FAT32). You
can also update software and program lists using this
connection.
6. MicroSD Slot.
Contents
The GO Android TV Box is supplied with the correct power
adapter for your local system.
1. Overview of the GO Android TV Box 2. Connecting the GO Android TV Box to a TV
Accessories
User Guide
Android TV Box (Amigo 7X)
Remote control
and batteries
HDMI cable
To Next Page
Need help?
General
