Tare Function
1. Turn on the scale as described above.
2. Place the trays provided or other containers on the scale, then press “T” button on
the platform and wait unit the LCD displays zero.
3. Scale can now be used for weighing. Add the “net-weight-item”.
Counting Function
1. Place the scale on a leveled surface & power on it.
2. Sampling: Prepare a sample quantity (25, 50, 70 or 100 pcs) of the item you want
to count. Put the item on the platform, press and hold the “PCS” button until the
scale shows “25”, “50”, “70”, or “100”. Press the “M” button to switch the above
figures to match the quantity of the items on the platform. Press the “PCS” button
again and display will show “pcs” in the lower left hand corner. Sampling is
completed.
3. Put the items you want to count on the platform and display will show the
quantity of these items.
To adjust the idle time for the auto off function
1. When the scale is turned off, long press the "M" button, at the same time, press
"ON/OFF" button for 4 times quickly till number is displayed, then release the “M”
button.
2. Press the “M” button to choose the auto-off time among 0/60/120/180 seconds.
After choosing, press "ON/OFF" key to confirm the setting.
▲ NOTE:
1. The "0" option deactivates the auto-off function.
2. Once the reading changes, it starts counting again and will auto off after 60120/180
seconds.
Warning
To Next Page
Loading...