Operating procedure
1. Charging
Place the charging base and charging cable on a flat surface in a well-ventilated and
dry place. (Charging base and charging cable are included in the S1 Golden Dot
Matrix RF Skin-tightening Machine)
1.1 Base charging
● Connect the charging cable to the power adapter
● Insert the Type-C connector of the charging cable completely into the charging port
of the charging base.
● Plug power adapter into the socket.
● Place the device into the fast charging base (forward and reverse charging
supported).
● When the charging indicator of the base is on (orange) for 2 seconds before going
out, it indicates that the charging base is powered on.
● When the device is placed on the charging base which is powered on, flashing
[orange] indicator of the base indicates the device is being charged, and [green]
indicator indicates the completion of the charging. (For important safety information
regarding charging, please refer to Safety Precautions)
To Next Page
Loading...