This document outlines the features, usage, and maintenance of the AMIRO R1 Lift Facial RF Skin Tightening Device, a multi-polar RF home beauty device designed to address facial concerns using radio frequency (RF), electrical muscle stimulation (EMS), and triple-effect phototherapy.
Function Description
The AMIRO R1 Lift Facial RF Skin Tightening Device is engineered to improve various facial problems through a combination of advanced technologies. Radio frequency (RF) technology works by delivering controlled heat to the deeper layers of the skin, stimulating collagen production and promoting skin tightening. Electrical muscle stimulation (EMS) gently contracts facial muscles, which can help improve muscle tone and firmness. The device also incorporates triple-effect phototherapy, utilizing specific light wavelengths to target different skin concerns, contributing to overall skin health and appearance. This integrated approach aims to provide comprehensive anti-aging and skin-lifting benefits, making it a versatile tool for at-home beauty routines. The device offers two distinct modes: an "Eye care mode" and a "Full face anti-aging mode," each tailored to specific treatment areas and durations.
Usage Features
The AMIRO R1 device is designed for user-friendly operation with clear instructions for charging, powering on/off, mode switching, and intensity selection.
Charging:
To charge the device, insert the Type-C connector of the charging cable into the device's charging port. The device is fully charged when all five intensity/power indicators are lit. It is important to note that the device cannot be used while charging. For stability, it is recommended to lay the device down during charging to prevent it from tipping over.
Powering On and Off:
Upon first use, the device defaults to "eye care mode." Subsequently, it will power on in the last-used mode. The device features an automatic shut-off mechanism; if no operation or skin contact is detected within 120 seconds after being powered on, it will turn off to conserve battery. To manually power off the device, long-press the power/mode button for 2 seconds.
Switching Modes:
When the device is powered on, a short press of the power/mode button allows users to switch between the "eye care mode" (indicated by a specific symbol) and the "full face anti-aging mode" (indicated by another symbol).
Selecting Intensity:
The default intensity upon first power-on is Level 1 (indicated by one light). The device remembers the last intensity used for subsequent sessions. After powering on, users can short-press the "+" button to increase intensity or the "-" button to decrease it. The intensity levels range from 1 (lowest, one light) to 5 (highest, five lights).
Power Indicator:
While powered on or in use, the device does not display remaining power. To check the remaining power when the device is off, press the power/mode button. Five indicators signify the highest power level, and one indicator signifies the lowest.
Low Battery and Power Shortage Warnings:
In powered-on or standby states, a flashing indicator signals low battery, prompting the user to charge the device for uninterrupted use. If the device is powered off and cannot be turned on by pressing the power/mode button, and the Level 1 indicator flashes five times before going out, it indicates a low battery, and immediate charging is required.
Care Advice:
- Eye Care Mode: Recommended 2-3 times per week. Use with AMIRO BEAUTY Gel or an eye mask. The sequence involves treating the left eye area for 2 minutes and then the right eye area for 2 minutes, totaling 4 minutes.
- Full Face Anti-Aging Mode: Recommended 2-3 times per week. Use with AMIRO BEAUTY Gel or a facial and neck mask. The sequence involves a V-shaped face mask for 2 minutes, followed by 1 minute for the left cheek, 1 minute for the right cheek, and 1 minute for the forehead, totaling 5 minutes.
Care Procedure:
- Makeup Removal and Cleansing: Ensure the skin is clean by removing all makeup and cleansing the face.
- Applying Gel: Apply the recommended gel to the center of the RF electrode or directly to the face. Replenish gel promptly if skin dryness or resistance is felt during use.
- Eye Care Mode (4 minutes): Select "eye care mode." Apply AMIRO BEAUTY Gel or eye mask around the eyes. Place the RF device on the left eye area and glide. For first-time users or after a long period of non-use, start with the lowest intensity to build tolerance. After the second brief vibration, move the device to the right cheek. Glide at a steady pace.
- Full Face Anti-Aging Mode (5 minutes): Select "full face anti-aging mode." Apply AMIRO BEAUTY Gel evenly over the entire face or place a face and neck mask on the jawline area. Place the RF device on the V-shaped face mask area and glide. For first-time users or after a long period of non-use, start with the lowest intensity to build tolerance. Move the device to the left cheek after the first brief vibration, to the right cheek after the second brief vibration, and to the forehead after the third short vibration. The treatment mode concludes when the device vibrates for 1 second and powers off. The device can be switched on again to continue use if needed.
- Cleansing and Hydrating: After the routine, wash the face with clean water and apply skincare products as desired.
Treatment Techniques (General Tips):
- Place the device against the face. Treatment begins after a brief vibration. Move to a different area after each vibration.
- The treatment mode finishes when the device vibrates for 1 second and powers off.
- To switch modes or repeat steps, restart the device and short-press the mode button. Do not exceed 30 minutes of use per day.
- During use, move the RF device slowly and continuously for optimal effect; avoid stopping in one spot.
Safety Precautions:
- Read all safety precautions carefully before use.
- Use Area:
- Level down on thin skin on the forehead and around the eyes.
- Use a medium level on moderately thick skin in the cheeks, near smile lines, jaw, and near the jawline.
- Avoid using the device on the eyeball, upper and lower eyelids, throat, and lymphatic area of the neck.
- Operation Precautions:
- Use in ambient temperatures between 10°C-30°C.
- Charge the device in temperatures between 10°C-30°C.
- Charge fully before first use or after long periods of non-use.
- Start at Level 1 intensity for first-time users or until skin adapts.
- Discontinue use and consult a doctor or after-sales service if abnormal skin conditions occur.
- Ensure RF electrodes are pressed against the skin. Glide the device at a recommended speed of 2cm/s; increase speed slightly if it feels too hot.
- Do not keep the device in one position for too long to prevent burns.
- Avoid direct, prolonged eye contact with the LED.
- Do not apply RF electrodes to eyelids or around the eyes.
- Temperature perception may vary due to individual skin sensitivity.
- The device cannot be turned on or operated while charging.
- Remove and safely dispose of the battery before discarding the device.
- General Precautions:
- For users over 18 years old; keep out of reach of children and do not use on minors or pets.
- Use only for specified purposes.
- Not for people with physical or mental disabilities.
- Do not use if malfunctioning.
- Avoid use near flammable substances (alcohol, thinner, gasoline, nail polish remover, styling spray) or with flammable cosmetics.
- Do not charge, use, or store near fire, heat sources, or high-temperature areas.
- Avoid use near water sources, in bathrooms, or while bathing.
- Avoid dropping or colliding the device/base. Do not use if damaged.
- Avoid contact of electrodes with metals.
- Do not use corrosive solvents for cleaning.
- Turn off power when not in use or being cleaned.
- Do not disassemble or modify the device. Contact after-sales service for repairs.
- Unplug immediately if abnormalities (smoke, noise, odor) occur during charging.
- Unsuitable Groups:
- Individuals experiencing menstruation, pregnancy, or breastfeeding.
- Individuals in puberty or adolescence.
- Individuals with metal implants around application areas.
- Individuals with cancer (especially skin cancer, pre-cancerous moles), acute diseases, tuberculosis, febrile diseases, infectious diseases, blood diseases, visceral diseases, skin diseases, allergic dermatitis.
- Individuals with allergies, skin conditions, allergic dermatitis, sensitive skin, etc., who experience discomfort or adverse effects.
- Individuals with impaired immune systems due to immunosuppressive diseases (e.g., AIDS) or immunosuppressive drugs.
- Individuals with permanent plastic fillers, temporary dermal fillers, or Botox implants in the application area (consult a doctor).
- Individuals with diseases in the application area due to thermal irritation (e.g., recurrent herpes simplex virus).
- Individuals with possible blemishes in the application area caused by physical irritation.
- Individuals who are fatigued, ill, under the influence of alcohol, or taking sleeping pills.
- Individuals with dilated capillaries caused by prolonged use of steroids, hormones, other drugs, or liver dysfunction.
- Individuals using medical devices such as artificial lungs, pacemakers, internal defibrillators, or portable electrocardiographs.
- Areas Where Device Should Not Be Applied:
- Throat nodules, eyeballs, eyelids, oral cavity, private parts, mucous membranes.
- Severe acne in the application area.
- Purulent and inflamed skin, previous scarring, or abnormal wound healing.
- Individuals who have undergone surgeries like laser peeling or chemical peeling in the last 3 months, or have healing wounds in the application area.
- Skin inflammation or redness due to sunburn.
- Itchiness or pathological pigmentation on the skin.
- Protruding moles or viral warts on the skin.
- Dermatological conditions such as rashes, inflammation, itchiness.
- Areas with damaged skin integrity (e.g., burns, blisters, cuts, wounds, active skin disease or infection).
- Consult a doctor if unsure about product suitability.
Maintenance Features
Proper maintenance ensures the longevity and optimal performance of the AMIRO R1 device.
Device Maintenance:
After each treatment session, it is crucial to wipe off any remaining gel from the RF device. Use a slightly damp soft cloth for this purpose, then thoroughly dry the device with a dry cloth before storing it in its box or a storage bag. This prevents gel residue from hardening or damaging the device's surface and ensures hygienic use for subsequent sessions.
Malfunction and Maintenance (Troubleshooting Guide):
The manual provides a comprehensive troubleshooting table for common malfunctions, their possible causes, and recommended solutions:
- Start Failure:
- Dead battery: Charge fully before use.
- End of battery life: Contact the manufacturer for repair or replacement.
- Automatic Power Off:
- No operation for more than 120 seconds: Restart the device.
- Dead battery: Charge fully before use.
- RF device electrodes not tightly pressed against the skin: Keep RF device electrodes tightly pressed against the skin.
- Inappropriate gel: AMIRO BEAUTY gel is recommended.
- Insufficient gel: Replenish gel on the face.
- Burning Sensations of the Face:
- High intensity: Lower intensity.
- RF device stays in one area: Slightly speed up RF device movement.
- Insufficient gel: Replenish gel on the face.
- Low Heat:
- Low intensity: Increase intensity.
- Fast RF movement: Slightly reduce RF device movement.
- Inappropriate mode: For the skin around the eyes, use the special care mode RF energy. For the whole face lifting mode, adjust to the current sense.
- Tingling Caused by Current:
- Device not pressed against the skin: Press the device against the skin.
- High mode intensity: Lower intensity.
- Redness of Skin After Use:
- Caused by RF heat: This normally recovers soon afterwards. Seek medical attention if redness persists or other discomfort occurs.
Warranty:
AMIRO provides a 1-year limited warranty. For detailed warranty policy information, refer to www.amirobeauty.com. After-sales services are generally limited to the country or region of original purchase. Under consumer warranty, AMIRO will, at its discretion, repair, replace, or refund the product. The warranty does not cover normal wear and tear, force majeure, abuse, or damage caused by user negligence or fault. Products not duly imported, manufactured by AMIRO, or acquired from AMIRO or an official AMIRO seller are not covered. Consumers may benefit from warranties from non-official retailers; contact the retailer for support.
Warnings:
The device carries a warning for non-ionizing radiation and advises users to read the user manual thoroughly.
To Next Page
Need help?
General
