Need help?Do you have a question about the Ammann ARX 16 K Yanmar and is the answer not in the manual?
General| Engine | Yanmar 3TNV76 |
|---|---|
| Amplitude | 0.5 mm |
| Centrifugal Force | 16 kN |
| Frequency | 60 Hz |
| Vibration Frequency | 60 Hz |
Details the purpose, target audience, and scope of this operating manual.
Specifies manual validity, technical changes, copyrights, and storage instructions.
Explains the manual's organization, orientation terms, and warnings.
Identifies different roller models based on weight and drum width.
Provides detailed dimensional data for the ARX 1 roller models.
Lists performance characteristics and fluid fill levels for the ARX 1.
Explains the data found on the roller's identification plate.
Defines the proper usage, driver requirements, and application limits.
Outlines improper usage and provides a disclaimer for Ammann Schweiz AG.
Provides essential safety rules for operating the roller in various conditions.
Covers safety precautions specific to roller driving and operation.
Details safety instructions related to the Rollover Protective Structure (ROPS).
Information on noise levels and the requirement for hearing protection.
Explains the meaning of warning and notice stickers on the machine.
Provides data on whole-body vibrations during operation.
Illustrates and labels key components visible from the driver's position and left side.
Details the functions of various switches on the instrument panel.
Identifies and describes the purpose of all control lamps on the instrument panel.
Explains the meaning of control lamps and error displays during operation.
Details error codes displayed upon start-up and during operation.
Outlines the conditions required for operating the roller and tire pressure checks.
Instructions for folding the ROPS upward and related safety warnings.
Covers safety information and how to adjust the driver's seat.
Details how to use the ignition switch and start the engine.
Explains setting operating speed, driving forwards, backwards, and braking.
Describes the function and selection of work and transport gears.
Explains the seat switch function and how to initiate/release an emergency stop.
Details checking water level, refilling, continuous, and interval sprinkling.
Covers simple/double vibration modes and vibration automation features.
Explains how to preset, operate, and use the edge cutter disks.
Details the operation of rear work lights and revolving warning lights.
Covers switching on, positions, and replacing bulbs for the warning light.
Information on fitting/removing the roof and removing the tarpaulin.
Instructions for switching the battery cut-off switch on and off.
Explains switching on anti-adhesive, its advantages, and designations.
Provides critical safety guidelines for performing maintenance and repairs.
Outlines important notes and safety regulations for maintenance tasks.
Presents a detailed maintenance schedule based on operating hours and time.
Provides a template for recording maintenance activities and observations.
Instructions and warnings for towing the roller safely in emergencies.
Details on safely opening the engine hood and related safety precautions.
Illustrates and labels the components within the engine compartment.
Covers checking fuel level, refueling, draining, cleaning the tank, and filter replacement.
Instructions for checking, topping up, draining engine oil, and replacing the filter.
Details checking, topping up, draining hydraulic oil, and filter/cooler maintenance.
Procedures for emptying the water tank, cleaning accessories, and checking coolant.
Guides for checking sprinkler system, scrapers, tire pressure, and air intake.
Explains how to test seat contact and emergency stop functions.
Provides instructions for performing a brake test on the roller.
Details lubrication points, lubricant table, and screw tightening specifications.
Guides on replacing the battery, jumper starting, charging, and storage.
Details fuse locations in the engine compartment and steering column.
Instructions for replacing front and rear lights and position lights.
Provides instructions for removing and installing gas struts safely.
Covers short-term and long-term storage, and winterization procedures.
Ensures cold air temperatures do not damage the sprinkler system.
Procedures for draining water from the tank and sprinkler, and removing the filter.
Details on blocking and securing the joint protection before transport.
Instructions for lifting the roller using the designated lifting point.
Guidance on lashing the roller to a transport vehicle, including angles.
Provides information on the roller's center of gravity for transport purposes.
Advises proper disposal and refers to authorized dealers for assistance.
Details safe methods for removing and depressurizing gas struts.
Presents the electrical wiring diagram for the ARX 1 roller.
Lists and describes elements and their corresponding codes in the wiring diagram.
Shows the hydraulic system diagram for the ARX 1 roller.
Explains the elements and components in the ARX 1 hydraulics diagram.
Presents the hydraulic system diagram specific to the ARX 1 K model.
Lists and describes components in the ARX 1 K hydraulics diagram.
To Next Page