Need help?Do you have a question about the Ammann ARR 1575 Yanmar and is the answer not in the manual?
General| Brand | Ammann |
|---|---|
| Model | ARR 1575 Yanmar |
| Category | Construction Equipment |
| Language | English |
General machine information and specifications.
Detailed physical dimensions and measurements of the machine.
Comprehensive technical specifications, including engine, weight, and performance.
Essential safety guidelines and warnings for operating the machine.
Guidelines for safe handling, environmental protection, and hygiene.
Procedures for storing and preserving the machine.
Instructions for the proper disposal of the machine.
Detailed overview and identification of machine components with diagrams.
Explanation of controls, indicators, and display units.
Details on the machine's display unit, control lamps, and indicators.
Operation, functions, safety, and zones of the infrared remote control.
Meaning of warning light beacon signals during operation.
How to operate and control the machine's functions.
Steps for preparing and starting the machine for operation.
Information on the protective cover for the display and remote control.
Procedures for starting the engine via ignition switch or remote control.
How to drive the machine and use its braking functions.
Steps to safely shut down the machine's engine.
Guidelines for parking the machine safely.
Instructions for accessing engine compartments.
Procedures to follow in case of machine overturning.
Methods and safety precautions for transporting the machine.
Steps and safety for loading the machine using ramps or cranes.
Operating the machine in various environmental conditions.
Initial operation and performance in cold weather.
Adapting operation for hot, high-altitude, and dusty environments.
Using vibration safely on various materials and terrain.
Information on available optional accessories for the machine.
Details on shutdown bar and drum extension set.
Information on filter sets and protective tarpaulins.
General safety rules and fire protection for machine maintenance.
Specific safety procedures to follow during maintenance.
Safety protocols when handling flammable liquids during maintenance.
Environmental and health guidelines for maintenance.
Details on required engine oil, fuel, coolant, and hydraulic oil.
Specifications and recommendations for engine oil.
Requirements and guidelines for using diesel and biofuel.
Specifications and safety for engine coolant.
Recommendations for hydraulic oil type and viscosity.
Standards for lubricants used in the machine.
Table of all fluids and their capacities for the machine.
Scheduled maintenance tasks based on operating hours.
Visual overview of lubrication and service intervals.
Step-by-step guides for specific maintenance tasks.
Procedures for checks and maintenance performed every 10 hours.
Procedures for maintenance performed every 100 hours (weekly).
Procedures for maintenance performed every 250 hours (3 months).
Procedures for maintenance performed every 500 hours (6 months).
Procedures for maintenance performed every 1000 hours (1 year).
Maintenance tasks performed as required.
Information on diagnosing and resolving machine issues.
Supplementary information including wiring, hydraulic diagrams, and spare parts.
Electrical wiring schematic of the machine.
Schematic of the machine's hydraulic system.
List of replacement parts with order numbers.
To Next Page