Ammann ARR 1575 Yanmar - Wiring Diagram

130 ARR1575
3.8.1. Wiring diagram
Legend:
F11 Fuse, controller, supply
F12 Fuse, controller, outputs
F13 Fuse, display unit, shutdown bar
F14 Fuse, hydraulic oil cooler
F21 Fuse, pull-in solenoid
F22 Fuse, diesel pump, alternator
F23 Fuse, operating speed
F24 Fuse, pre-heating coil
F25 Fuse, “2nd solenoid”
G1 Alternator
G2 Battery
K1 Relay, ignition
K2 Relay, starting interlock
K3 Timer relay
K4 Relay, pull-in solenoid
K5 Relay, operating speed
K6 Relay, pre-heating coil
K7 Relay, hydraulic oil cooler
K11 Relay, “solenoid driver”
M1 Starter motor
M2 Diesel pump
M3 Hydraulic oil cooler
N1 Machine controller
N2 Display unit
N3 Infrared remote control
P1 Front infrared sensor
P2 Rear infrared sensor
R1 Pre-heating coil
S1 Switch, ignition switch
S21 Sensor, engine oil pressure
S22 Sensor, coolant temperature
S24 Sensor, shutdown bar
S25 Sensor, hydraulic oil temperature
Y1 Magnet, pull-in / holding solenoid
Y2 Magnet, operating speed
Y3 Magnet, drive pump, forwards
Y4 Magnet, drive pump, backwards
Y5 Valve, steering, left
Y6 Valve, steering, right
Y7 Valve, large amplitude vibration
Y8 Valve, small amplitude vibration
Y9 Valve, locking brake
Y11 Magnet, “2nd solenoid”
3.8. Annexes