Ammann ARR 1575 Yanmar - Turning Off the Engine; Machine Parking

66 ARR1575
555097
555077
2.7. Machine control and use
2.7.5. Turning o the engine
• Move the switch on the infrared remote control to the Stop
position.
• Turn the ignition key to the “0” position.
As long as the “Start-Stop” rocker switch is placed in the
“neutral” position, the transmitter remains operational.
Always switch o the transmitter during work breaks
and after completing work by moving the rocker switch
to the “Stop” position.
2.7.6. Machine parking
• Clean the Machine to get rid of any coarse dirt.
• Carry out overall inspection of the Machine and repair any
defects that occurred during operation.
• Use scotch blocks to secure the drums.
• Close and lock the protective cover.
Shut down the Machine on at and paved surface.
Conrm there is no potential of natural hazard (land-
slide, potential ooding due to any deluges, etc.) at the
location.