109ARR1575
1
MAINTENANCE MANUAL
Every 50 hours of operation
3.6.11. Inspection of brakes
• The function of the brakes must be checked periodically.
• The cable / connector Y9, which must be disconnected for
the brake test, is located at the front under the hood.
• Put the machine into the work gear.
• Disconnect connector Y9 (1) from the connector housing at
the magnet.
• Perform the forwards and backwards driving functions us-
ing the infrared sensor.
• If abrake is defective, the corresponding drum will rotate.
Note:
If abrake is defective, the machine is no longer safe for opera-
tion. Contact your authorized dealer and have the machine re-
paired professionally.