Ammann ARR 1575 Yanmar - Assurance of Safety Measures by the Operator; Requirements on Qualification of Operating Personnel

20 ARR1575
2.1. Major Safety Precautions
2.1.1.3. Assurance of safety measures bytheop-
erator
• The operator must ensure that the machine is operated
only under conditions and only for purposes it is technically
capable of according to the conditions set by the manufac-
turer and the respective standards.
• The operator must ensure using the machine in such a way
and in such worksites where there is no risk of hazardous
transmitting of vibrations and damage to nearby buildings
etc.
• The operator must ensure regular inspection of operation
and technical conditions, regular maintenance of the ma-
chine in intervals specied in the manuals for lubrication
and maintenance. If the technical condition of the machine
does not meet requirements to such an extent that it poses
a risk to safety of operations, persons and property, or dam-
ages and harms the environment, the machine must be put
out of service until the defects are removed.
• He must specify who is allowed to carry out operation, main-
tenance and repairs of the machine as well as what activities
can be carried out during the operation, maintenance and
repair of the machine.
• Every person who drives the machine or performs mainte-
nance and service of the machine must be familiarised with
instructions stipulated in the operation manual of the ma-
chine.
• The operator must ensure that the re extinguisher is
checked on regular basis.
• The operator must ensure that the „Operation manual“ is
available at the designated place in the machine.
• The operator must ensure continuous supervision by an ap-
pointed person during machine operation on public roads,
and he is especially liable for releasing instructions to ensure
health protection and work safety.
• The operator must ensure removal of spilled hazardous
materials (fuel, oil, cooling liquid, brake uid, etc.) from the
places of spillage, depending on their nature, so as to avoid
their adverse impact on the environment, safety of opera-
tion and human health.
2.1.2. Requirements on qualication ofoperat-
ing personnel
• The machine can only be driven by a person who has been
trained according to ISO 7130 and other local and national
instructions and standards specied for drivers of this group
of machines.