Ammann ARR 1575 Yanmar - Putting the Machine into Operation after Storage

34 ARR1575
2.3. Machine preservation and storage
2.3.3. Putting the machine into operation af-
terstorage
• Check that some parts of the machine have not been dam-
aged during storage and are not missing.
Remove preservation agents before putting the machine
into operation:
Wash o the preservation agents using high pressure
stream of hot water with common degreasers while
observing the operation manual and the ecological
principles.
Carry out removing of the preservation agents and
washing the machine at places provided with intercept-
ing sumps to trap the rinsing water as well as deconserv-
ing agents.
• Prepare the engine for operation according to the manual
from the manufacturer.
Check the level of operating uids before you put the
machine into operation!