Ammann ARR 1575 Yanmar - Machine Loading Procedures

77ARR1575
555095
MAX 30 %
OPERATION MANUAL
2.8.1. Machine loading
• Use a loading ramp or crane to load the machine onto the
transport vehicle.
2.8.1.1. Loading the machine using a ramp
• When loading the machine using a ramp, all safety regula-
tions related to loading of the machine valid in the place of
loading must be adhered to. The ramp must have appropri-
ate loading capacity, antislip surface and must be stored on
a at surface. We recommend that you adhere to regulation
BGR 233.
• Maximum permissible incline of the ramp is 30 %.
Non-adherence to the prescribed parameters of the
ramp may result in damage to the machine.
Pay increased attention when loading the machine.
Improper handling can cause serious injury or death.