Ammann ARR 1575 Yanmar - Cleaning the Hydraulic Oil Cooler

104 ARR1575
555043
3.6. Individual Operations of Maintenance
3.6.5. Cleaning the hydraulic oil cooler
• Check the cooling ribs of the hydraulic oil cooler for dirt and
clogging.
• Clean the ribs with water or blow them out with compressed
air.
• In case of work in very dusty conditions clean the radiator
daily. Clogged radiators will result in lower cooling capacity
and increasing temperatures of engine cooling liquid and
hydraulic oil.
Donot use cleaner with too high pressure so as not to
damage radiator honeycombs.
In case of contamination of the radiator by oil products,
use acleaning agent and proceed according to the manu-
facturer’s instructions! Find the cause of contamination!
No smoking at work!
Check the tightness of the hydraulic circuit.
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in asite equipped with an intercept-
ing system for cleaning agents so that the soil and water
sources are not contaminated!
Donot use forbidden cleaning agents!