35ASC 70 / 90 / 100 / 110 / 130 / 150 / 200 / 250
WORKSHOP MANUAL
USE TOOLS PROPERLY
Use tools appropriate to the work. Makeshift tools, parts, and
precedures cam create safety hazard.
Usare soltanto attrezzi appropriati per allentare elementi let-
tati e di ssaggio.
Use power tolls onlyto losen threaded tools and fasteners.
For loosening and tightening hardware, use the correct size
tools. Do not use U.S. measurementt tools on metric fasteners.
Avoid bodily injury caused by slipping wrenches.
Use only recommended replacement parts. (See Parts Catalog).
EVACUATING IN CASE OF FIRE
If a re breaks out, evacuate the machine in the following way:
Stop the engine by turning the key-start switch to the OFF posi-
tion if there is time.
Use a re extinguisher if there is time.
Exit the machine
MANUALEQUIPOSPESADOS.COM manualequipospesados@gmail.com
To Next Page
Loading...
