Need help?Do you have a question about the Ammann AP 240 and is the answer not in the manual?
General| Brand | Ammann |
|---|---|
| Model | AP 240 |
| Category | Utility Vehicle |
| Language | English |
Essential machine identification and core specifications.
Visual representation of machine dimensions and key measurements.
Comprehensive list of machine specifications, weights, and performance.
List of available optional features for the machine.
Critical safety guidelines and precautions for machine operation.
Guidelines for environmental protection and personal hygiene.
Procedures for preserving and storing the machine.
Instructions for proper disposal of the machine at end-of-life.
Overview of the machine's main components and parts.
Explanation of the dashboard, controls, indicators, and switches.
Details on adjusting the driver's seat and using specific controls.
Guide to operating the machine's digital display and its functions.
List and explanation of error messages displayed by the machine.
Instructions on operating the machine's functions and systems.
Step-by-step guide for starting the machine's engine safely.
Procedures for moving the machine forward, backward, and handling slopes.
How to use the emergency stop function to halt the machine.
Instructions for properly stopping the machine and its engine.
Guidelines for safely parking the machine.
Operation of the watering system and scrapers.
How to operate the edge cutter function.
Procedures and safety measures for transporting the machine.
Guidelines for operating the machine in challenging environments.
Instructions and precautions for towing a disabled machine.
Specific operating guidelines for the initial running-in phase.
Precautions and procedures for operating in cold temperatures.
Considerations for operating in hot and humid conditions.
Factors affecting performance at high altitudes.
Recommendations for operating in dusty conditions.
Essential safety rules and regulations for performing maintenance.
Details on recommended oils, fuels, and fluids for the machine.
Table summarizing all media used in the machine, with types and quantities.
Schedule of lubrication and maintenance tasks based on operating hours.
Visual diagram indicating lubrication points and types of service.
Detailed procedures for performing lubrication and maintenance tasks.
Routine checks performed every 20 hours of operation.
Maintenance tasks performed weekly (every 100 hours).
Maintenance procedures required after 250 hours of operation.
Maintenance procedures required after 500 hours of operation.
Maintenance procedures required after 1000 hours of operation.
Maintenance procedures required after 2000 hours of operation.
Tasks to be performed as needed, not based on fixed intervals.
Information on common machine defects and troubleshooting advice.
Electrical schematic showing the machine's wiring system.
Schematic of the machine's hydraulic system components and flow.
Diagram illustrating the machine's air system components and layout.
To Next Page
