3.6. Lubrication and Maintenance Operations
3.6.31. How to exchange oil in hydraulic
cylinders for front axle
Use front lifting lugs to lift a bit the front part of the Roller so •
its front wheels get relieved by means of crane, or use hand
jack behind front wheels.
Remove cover.•
Remove fast coupling on the pipe that connects hydraulic •
cylinders for front axles, put on the hose, and descend the
Machine slowly to drain oil into a vessel set up. Screw back
the lling fast coupling, ll hydraulic cylinders with new oil
via lling equipment. The amount of oil medium is 6 l (1,6
gal US).
Observe re precautions!
Use recommended oil as per Section
3.2.4.
Spent oil is ecological waste – hand over
for disposal.
To Next Page
Loading...
