Ammann AP 240 - 2.2. Ecological and Hygienic Principles

35AP 240
OPERATION MANUAL2.2. Ecological and hygienic principles
When operating and storing the Machine
the User shall be liable to adhere to the
general principles of health and environ-
ment protection, as well as the laws, reg-
ulations, and rules related to this issue,
and eective within the territory where
the Machine will be used.
2.2.1. Hygienic principles
Oil products, cooling system media, battery media, and coa- •
ting compositions incl. thinners are deleterious materials.
Persons that come into contact with these products during
Machine operation and maintenance shall be liable to follow
general principles of own health protection and conform to
the safety and hygienic directions from manufacturers of
these products.
Observe the following in particular:
Eye and skin protection when handling the batteries
-
Skin protection when handling oil products, coating
-
compositions and cooling liquids
Wash your hands thoroughly upon work completion and
-
before meal, treat your hands with proper tissue cream
When handling the cooling systems, please observe in-
-
structions given in the Operation Manual supplied with
the Machine.
Always store oil products, cooling system media, battery
•
media and coating compositions incl. organic thinners, and
the cleaning and preservation agents as well, in their origi-
nal properly marked packages. Admit no storage of these
materials in unidentied bottles or other vessels with regard
to the risk of being interchanged. Especially hazardous is the
potential of interchanging for eatables or drinks.
If skin, mucosa or eyes are stained accidentally, or vapours
•
inhaled, promptly apply the rst air principles. Get prompt
medical attention upon accidental ingestion of these pro-
ducts.
2.2.2. Ecological principles
When discarded, the media for Machine’s individual systems •
and some of the Machine’s parts will become waste of haza-
rdous properties against the environment.
This waste product category includes the following in par-
ticular:
Organic and synthetic lubrication materials, oil and
-
fuels,
Cooling liquids,
-
Battery media and the batteries themselves,
-
Tyre media
-
Cleaning and preservation agents,
-
All lters and lter elements removed,
-
All used and discarded hydraulic and fuel hoses, metal
-
rubbers or other Machine’s elements contaminated by
the abovementioned products.
Manufacturer and Manufacturer-accredited contracting ser-
•
vice organizations or dealers take back these used materials
or parts without cost:
oils
-
batteries
-
tyres
-
The mentioned materials and parts,
when discarded, shall be handled in
line with relevant national regulations
to protect individual components of en-
vironment, and in conformity with the
health protection regulations.